Page Comparison

No audio on Teaching Station microphones or speakers are off???

You have AMPs off most likely

Go to the room where tech staff stores the

Lectern in the back hallway to the left of the DMC 3.206 Screen in the Amp closet

Locate Circuit B - labeled on the RACK RAILS on front side of RACK

Locate Circuit D - labeled on the RACK RAILS on front side of RACK

GO BEHIND THE RACK AFTER LOCATING B AND D POWER CIRCUTS

WE WILL access THE CONTROLS FOR THESE CIRCUITS on the back

Make sure the switch is set to LOCAL

Then press the "Local Sequence Initiate"

PRESS for a second or so really press the button!

The power should restore on the Amps that are off.  May take about 5-10 seconds

NOTE Amps that are on will stay on