Connect the Lighting Fixture to the lighting grid or findthe fixture on the grid that you want to turn on.Locate where it is plugged in.In this picture example the Light is plugged into "S1" | |
Next we need to find the "Circuit" to turn on that matches "S1"
| |
On the Strand Lighting Board,Press F3 to get into thesetupSetup menu | |
Press "Right" arrowtilluntil you get tomenuMenu #9 Reset to default" | |
Choose Select and thenChoosePress F2 to confirm "Yes"toand reset the defaults | |
Hit F1 to "ESCto" and get to the home page. =for Setup | |
Select 1.Or Patch click on press (Select) or F3 | |
Choose 1. "Edit Patch" click on F3 to select | |
Enter in the circuit to assign to the board. "73@40" and follow that by pressing the asterisk key ( * ) | |
Asterisk key that is the same as "enter"to set the dimmer assignment | |
Make sure that the scene mode is in"Single Scene" seems to work the bestPreset A should be up | |
Make sure Grand Master is also upon the slider position |
...