Download and Print the guide using this link:
Drillable Apple Boxes | Pancake (left): 12”x3”x20” wooden box
Half (center): 12”x6”x20” wooden box
Full (right): 12”x8”x20” wooden box | Raising actors, furniture, for sitting or standing. These can be drilled into, if needed. | |
Non Drillable Apple Boxes | Pancake (left): 12”x1”x20” wooden box
Half (center): 12”x4”x20” wooden box
Full (right): 12”x8”x20” wooden box | Raising actors, furniture, for sitting or standing. These CANNOT be drilled into. | |
American Stand DOUBLE Riser | Stand with 7 knobs and small spuds | Raising heavy lights | |
American Stand TRIPLE riser | Stand with 8 knobs and small spuds | Raising heavy lights | |
C-Stand Tall | Very tall Century stand with gobo arm, gag, and knuckle | C-Stands are for holding diffusion in front of lights, NOT for lights to be held on | |
C-Stand | Century stand with gobo arm, gag, and knuckle | ||
C Stand Mole Short | Short Mole stand with gobo arm, gag, and knuckle | ||
C Stand 30” | Avenger 30" C Stand with removable black turtle base, | ||
C Stand Tiny | Avenger 20" C-Stand with Avenger turtle base, 20" gobo arm and grip head | ||
Low-Boy Riser | Part of the Dana Dolly Kit! | Raising or Holding the Dana Rails. | |
Rolling Stand (Small) | Stand with Baby Spud
| For rolling support of 1K’s, In betweenies, Mole | |
Rolling Stand (Large) | Stand with Junior (1 1/8”) female | For rolling support of HMI’s | |
Lightweight Blade Stand | Light weight stand for lights | For Static support of 1K’s, In betweenies, Mole Solarspots | |
Lightweight Black Blade Stand | Light weight stand for lights | For Static support of lights less than 1K | |
C Clamp | Clamp with no spuds | Holding together flats and other surfaces | |
Baby C Clamp | Silver Matthews clamp with 5/8” baby spud | Holding together flats, clamping onto surfaces and attaching lights to the spuds. | |
Pipe Clamp Small | Clamp with 5/8” small spud | For mounting onto tables, pieces of wood, flat surfaces and being able to mount small lights on spuds. | |
Pipe Clamp Large | Clamp with 1 1/8” large spud | For mounting onto tables pieces of wood, flat surfaces and mounting bigger lights then small pipe clamps | |
Mafer Clamp | Clamp with snap in pin for 5/8” Mafer | For clamping onto surfaces with more control, spud for mounting a small light, more flexible than gaffer grip. | |
Double Convi Clamp | Kupo Double Convi Clamp with 5/8" spud. | For Clamping a wide variety of materials together at a right angle. | |
Scissor Mount | Mount with scissor like lock | Locks into place, can mount a light on it. | |
Gaffer Grip | Grip with 2 spuds. Also called alligator clamp. | For mounting small lights on spuds | |
Cardellini Double Spud Clamp | Jaw clamp with 5/8 spud on both ends | For grabbing objects which are then mounted on a C Stand | |
Cardellini End Jaw | Jaw clamp on one end and 5/8 spud on other end | ||
Cardellini Mic Mount | Jaw clamp on one end and microphone mounting threads on the other end | ||
Mathelini 6” End Jaw | Jaw Clamp on one end and 5/8 spud on other end | ||
Pony Clamp | Metal clamp with spring operated jaws. Orange or Blue. | Spring-operated jaws hold any material quickly and efficiently. | |
Larson Universal Clamp | Clamp with 2 knobs and 2 washers--one washer is smooth and the other washer has teeth. | Clamp a flag in it, then attach clamp to a Mafer clamp. | |
Duckbill Clamps | Clamp with 5/8 spud | For holding foam core reflectors in place. Can also be used for lite disc reflectors | |
Cantrell Holder | A 3/8” shaft threaded at one end with square plates attached. | The foam core is "speared", and the white plate is then mounted on the foam with the wing nut. The shaft may then be mounted into a grip head, and the foam core placed and held in position on any stand. | |
Bread Board Holder | 3/8” shaft threaded at one end with square plates attached. The corners are bent in. | ||
Baby to Spud Adapter | 5/8 to 1 1/8 adapter | To use a light with a baby adapter on a light stand with only a larger spud…. | |
Baby Offset Arm |
| For attaching two lights to a stand | |
Magic Arm | Fully articulated arm with 90° pivoting and 360° rotating ends, an elbow that rotates 360°. It has 5/8 studs on ball joints at both ends. | Allows partial loosening for safe and precise positioning of a light head. Load Capacity 6.61 pounds | |
Safety Cable | Bundles of wire in groups of 10 | For fastening equipment in trucks for transport and on sets, to act as second safe fastener for lights attached to ceilings or overhead. | |
Wedges | Set of wooden wedges in green (11), red (11), and black (11) crates. | To level out dolly track on uneven surface. | |
Track Wheels for Dolly | Set of 4 wheels to fit both American and Matthews dollies and Elemack track in purple 10 gallon storage bin with lid | To be put on dollies to ride on the dolly track | |
Dolly, American | Has 2-piece handle, 2 wings and 14 knobs. Blue (looks similar to Matthews Dolly)
| For tracking shots | |
Dolly, Matthews | Has 2-piece handle, 2 wings, and 10 knobs. Orange (Pictured) | For tracking shots | |
Dolly, Dana | The Dana Dolly kit includes the Dana Dolly with Mitchell base, a 75mm adapter, 100mm adapter, 150mm adapter, two track end brackets, a center support, a large washer and a multi-tool. | For Tracking shots | |
Dolly, Vector | For advanced classes only. You must take a training class to use this item. | For tracking shots, also has boom feature | |
Gorillapod with Cineskates | Gorilla pod,
MAX weight is 5 Pounds! | For controlling camera movement | |
| |||
Light Kits | |||
KinoFlo Diva | Diva light, Gel Frame, | Lighting for interviews or sets | |
Lowell Rifa 250 | Light fixture, | Lighting for interviews or sets | |
Lowell Rifa 500 | Light fixture, | Lighting for interviews or sets | |
Lowell DP | Lowell 500 watt open-faced tungsten with: barn doors | Lighting for interviews or sets | |
Mole 300 W Fresnel In-Betweenie | 300W In-betweenie with barn doors | Lighting sets primarily | |
Cowboy Softbox | five (5) 45 watt bulbs = 2000 watt | Lighting for interviews or sets | |
Softbox | Flashpoint SoftBox: | Lighting for interviews or sets | |
3 Light Fluorescent Kit | 3-7' stands, | NOTE: USE A SANDBAG SO THE LIGHT DOESNT TIP OVER | |
Silverdome | Light head, | Lighting for interviews or sets | |
Arri 150 | Arri 150 light with attached power cable | Lighting for interviews or sets | |
Arri 3 Open Face/Softlite Kit | Two Arrilite 600 fixtures, one Arri 650 fixture three barn doors, three stands,
| Lighting for interviews or sets | |
Lowell Go Kit | 2 250W Pro lights, 2 stands, 2 barn doors, 1 umbrella, 1 gel frame. I spare bulb, case. | Lighting for interviews, some sets | |
Lowell Tota Kit (Large) | 3 tota lites, 3 AC cords, 3 stands, 1 spare bulb, 3 gel frames, 3 scissor mounts, 3 folding clamps, 3 heavy bar extension clamps, 4 flexible bar, 3 umbrellas | Lighting sets primarily | |
Lowell Tota Kit (small) | 3 tota light fixtures each has a scrim | Lighting sets primarily | |
1K Open Face Strand | Orange, 1000w light with barn door, retaining ring and clip (comes in a case with a set of 2) | Lighting sets primarily | |
Teenie Weenie Kit | 3 600W lights, 3 stands, 3 extension cords, 3 barn doors, 2 scrims, 1 spare bulb | Lighting sets primarily | |
Tweenie Softie Kit | 2 mole 650W solarspots, 2 barn doors, 2 diffuser frames, scrim bag for tweenie with 2 half single, 2 half double, 2 single, 2 double scrims. Type 2981 softlite, 1 egg crate, 1 diffuser frame, 1 scrim bag with 1 single & 1 double scrim, 3 light weight stands, molded case. | Lighting sets primarily | |
Wescott Flex Light LED | LED Light that is flexible, can be bent. Can also be mounted for stability. 1900 lux output. 1’x1’
NO BATTERY | Flexible LED lighting for interviews or lighting small spaces like inside a car. | |
Battery Powered Lights | |||
Icelight | Small light shaped like a lightsaber! | Lighting a small space | |
Teenie Weenie Sungun | 30V battery, DYG 250W bulb, 120v-30v cable, teenie weenie fixture, case. | Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors) | |
Sungun Kit | (2) lights attached together with attached 4-pin power cable. | Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors) | |
Sungun Kit (Cine 60) | Sungun light with battery belt. | Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors) | |
Single Lights | |||
650 W Open-Faced Teenie Mole | 650 W open-faced teenie mole, no barndoors | Lighting sets primarily | |
1K Fresnel (Type 407) | 1000W Solarspot type 407 with yoke and barn doors Looks and performs like Cool Redhead below. The difference is the color of the fixture. The “Cool Redhead” is actually silver. While the Baby Solarspot is red. | Lighting sets primarily | |
1K Fresnel Cool Readhead (Type 3081) | 1000W Solarspot type 407 with yoke and barn doors | Lighting sets primarily | |
1K Fresnel Snootable (Type 751) | 1000W Snootable type 751 with barn doors | Lighting sets primarily | |
750 Watt Softlight “Baby Soft”
| 750W Baby soft light | Lighting sets primarily with a softer light | |
1K Softlight | 1000W softlight with large spud | Lighting sets primarily with a softer light | |
HMI and HMI Equivalent Lights (Restricted to classes above 366K) | |||
200 HMI Digimole | 1 200W HMI digimole head, 200W AC ballast, 1 4way barn door, 1 handle, molded case | Provides more powerful light than other lights on set, used to simulate daylight. | |
400 HMI (PAR) | 400W joker HMI with electronic ballast, lamp head, 25 extension cable, four leaf barn door, case on wheels | Provides more powerful light than other lights on set, used to simulate daylight. | |
800 HMI (PAR) | Joker 800W light head, electronic ballast, cable, extension cable(25 feet), four leaf barn door, super wide lens with ring, medium flood lens with a ring, frosted glass beaker, white carrying case with lens bag | Provides more powerful light than other lights on set, used to simulate daylight. | |
575 HMI, Mole | Mole HMI 575W light with ballast, barn door, and cables | Provides more powerful light than other lights on set, used to simulate daylight. | |
1.2 HMI, Arri | Arri 1.2W HMI light with ballast, barn doors, and 50’ cable. | Provides more powerful light than other lights on set, used to simulate daylight. | |
1.2 HMI, Mole | Mole 1.2W HMI light with ballast, barn doors, and 50’ cable. | Provides more powerful light than other lights on set, used to simulate daylight. | |
Hive Killer Plasma | Hive Killer Plasma HMI Equivalent light Kit. 1.2 HMI equivalent output 575W draw | Provides more powerful light than other lights on set, used to simulate daylight. | |
Jab Daylight LED | AadynTech Jab Daylight LED 575 HMI Equivalent Output 200W draw
Also does lightning Effects | Provides more powerful light than other lights on set, used to simulate daylight. | |
Profoto 400 | Ballast with power cable, ProFoto head with attached cable, | Lighting for interviews or sets | |
Lighting Control | |||
Flags and Cutter | Cutter- 41”x10” Extra Small- 12”x18 Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Blocking out light | |
Single Nets | Extra Small- 12”x18” Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Diffusing light by 1 layer of net | |
Double Nets | Extra Small- 12”x18” Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Diffusion light by 2 layers of net | |
Silks | Extra Small- 12”x18” Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Diffusing light by 1 layer of silk | |
¼ Stop Silks | Small- 18”x24” Large-24”x36” | Diffusing light by ¼ layer of silk. | |
Reflector, LiteDisc, 22” Silver/White | 22” Reflector: Silver on one side, White on the other | Reflecting, blocking or diffusing light. | |
Reflector, LiteDisc 32” Silver/White or Silver/Gold | 32” Reflector: Silver on one side, White or Gold on the other | ||
Reflector, LiteDisc 42” Translucent | 42” Reflector: Translucent | ||
Reflector, LiteDisc 22” or 32” 5in1 | 22” or 32” Reflector: Translucent disc, silver reflector, gold reflector, silver/gold reflector and flag. | ||
Reflector, LiteDisc 18” 8in1 | 18” Reflector: Gold, sun fire, sunlight, silver, soft silver, white, black, and 2-stop diffuser covers | ||
4 in 1 reflector (rectangle) | 20”x30” frame with silver, gold, white and black sides. | Reflecting, blocking or diffusing light. | |
Reflector Boards (2 in wooden box 24x24) | Wooden box with two 24”x24” reflectors | Reflecting light | |
Reflector Holder | 19” to 48” collapsible Reflector Holder | To hold LiteDisc reflectors | |
4x4 Butterfly Kit | 4X4 butterfly kit includes: one 4X4 flat frame, one 4’ double net, one 52" single net, one 52" silk, one 52" flag. | Reflecting, blocking or diffusing light. | |
6x6 Butterfly Kit | 6X6 butterfly kit includes: one 6X6 frame (4 poles), one 6’ double net, one 6’ single net, one 6’ silk, one 6’ flag. | ||
8x8 Butterfly Kit | 8X8 butterfly kit includes: one 8X8 frame (4 poles), one 8’ double net, one 8’ single net, one 8’ silk, one 8’ flag. | ||
Extension Cables/Studio Power Adapters | |||
Extension Cord, light duty 50’ | 14 gage Extension Cable. Max 1000 Watts | Providing an extension for AC power. | |
Extension Cord, heavy duty 50’ | 12 gage Extension Cable. Max 1500 Watts | ||
Extension Cord, heavy duty 100’ | 12 gage Extension Cable. Max 1500 Watts | ||
Extension Cord, extra heavy duty 50’ | 10 gage Extension Cable. Max 1500 Watts | ||
Extension Cord, Quad (15amp Edison) | Edison to Quad Edison | Providing an extension for AC power. Max 1500 Watts. These are both GFCI cables and will not work with Diva lights. | |
Extension Cord, Quad (20amp Edison) | 20amp Edison to Quad Edison. This will not work in older houses or non-industrial buildings! | ||
20 Amp to 20 Amp Studio Extension | 20 Amp to 20 Amp Studio Extension | Providing a conversion from 20 Amp to Edison power | |
20 Amp to Edison Duplex | 20 Amp to Edison Duplex | ||
Jumper | 20 Amp to Edison | ||
3000 Watt Breakout Box
| 50 Amp to 3 Edison | Providing a conversion from 50 Amp to Edison Power. | |
50 Amp to Duplex or Quad | 50 Amp to 2 or 4 Edison | ||
Stage Pin | 60 Amp to 4 Edison | Providing a conversion from Stage-Pin to Edison power. |