Grip Equipment |
Drillable Apple Boxes | | Pancake (left): 12”x3”x20” wooden box
Half (center): 12”x6”x20” wooden box
Full (right): 12”x8”x20” wooden box | Raising actors, furniture, for sitting or standing. These can be drilled into, if needed. |
Non Drillable Apple Boxes | | Pancake (left): 12”x1”x20” wooden box
Half (center): 12”x4”x20” wooden box
Full (right): 12”x8”x20” wooden box | Raising actors, furniture, for sitting or standing. These CANNOT be drilled into. |
American Stand DOUBLE Riser | | Stand with 7 knobs and small spuds | Raising heavy lights |
American Stand TRIPLE riser | | Stand with 8 knobs and small spuds | Raising heavy lights |
C-Stand Tall | | Very tall Century stand with gobo arm, gag, and knuckle | C-Stands are for holding diffusion in front of lights, NOT for lights to be held on |
C-Stand | see above | Century stand with gobo arm, gag, and knuckle | C-Stands are for holding diffusion in front of lights, NOT for lights to be held on |
C Stand Mole Short | see above | Short Mole stand with gobo arm, gag, and knuckle | C-Stands are for holding diffusion in front of lights, NOT for lights to be held on |
C Stand 30” | see above | Avenger 30" C Stand with removable black turtle base, 40" black gobo arm and grip head | C-Stands are for holding diffusion in front of lights, NOT for lights to be held on |
C Stand Tiny | see above | Avenger 20" C-Stand with Avenger turtle base, 20" gobo arm and grip head | C-Stands are for holding diffusion in front of lights, NOT for lights to be held on |
Low-Boy Riser | | Part of the Dana Dolly Kit! | Raising or Holding the Dana Rails. |
Rolling Stand (Small) | | Stand with Baby Spud
| For rolling support of 1K’s, In betweenies, Mole |
Rolling Stand (Large) | see above | Stand with Junior (1 1/8”) female | For rolling support of HMI lights |
Lightweight Blade Stand | | Light weight stand for lights | For Static support of 1K’s, In betweenies, Mole Solarspots |
Lightweight Black Blade Stand | see above | Light weight stand for lights | For Static support of lights less than 1K |
C Clamp | | Clamp with no spuds | Holding together flats and other surfaces |
Baby C Clamp | see above | Silver Matthews clamp with 5/8” baby spud | Holding together flats, clamping onto surfaces and attaching lights to the spuds. |
Pipe Clamp Small | | Clamp with 5/8” small spud | For mounting onto tables, pieces of wood, flat surfaces and being able to mount small lights on spuds. |
Pipe Clamp Large | see above | Clamp with 1 1/8” large spud | For mounting onto tables pieces of wood, flat surfaces and mounting bigger lights then small pipe clamps |
Mafer Clamp | | Clamp with snap in pin for 5/8” Mafer | For clamping onto surfaces with more control, spud for mounting a small light, more flexible than gaffer grip. |
Double Convi Clamp | see above | Kupo Double Convi Clamp with 5/8" spud. | For Clamping a wide variety of materials together at a right angle. |
Scissor Mount | | Mount with scissor like lock | Locks into place, can mount a light on it. |
Gaffer Grip | | Grip with 2 spuds. Also called alligator clamp. | For mounting small lights on spuds |
Cardellini Double Spud Clamp | | Jaw clamp with 5/8 spud on both ends | For grabbing objects which are then mounted on a C Stand |
Cardellini End Jaw | see above | Jaw clamp on one end and 5/8 spud on other end | For grabbing objects which are then mounted on a C Stand |
Cardellini Mic Mount | see above | Jaw clamp on one end and microphone mounting threads on the other end | For grabbing objects which are then mounted on a C Stand |
Mathelini 6” End Jaw | see above | Jaw Clamp on one end and 5/8 spud on other end | For grabbing objects which are then mounted on a C Stand |
Pony Clamp | | Metal clamp with spring operated jaws. Orange or Blue. | Spring-operated jaws hold any material quickly and efficiently. |
Larson Universal Clamp | | Clamp with 2 knobs and 2 washers--one washer is smooth and the other washer has teeth. | Clamp a flag in it, then attach clamp to a Mafer clamp. |
Duckbill Clamps | | Clamp with 5/8 spud | For holding foam core reflectors in place. Can also be used for lite disc reflectors |
Cantrell Holder | | A 3/8” shaft threaded at one end with square plates attached. | The foam core is "speared", and the white plate is then mounted on the foam with the wing nut. The shaft may then be mounted into a grip head, and the foam core placed and held in position on any stand. |
Bread Board Holder | see above | 3/8” shaft threaded at one end with square plates attached. The corners are bent in. |
|
Baby to Spud Adapter | | 5/8 to 1 1/8 adapter | To use a light with a baby adapter on a light stand with only a larger spud…. |
Baby Offset Arm | |
| For attaching two lights to a stand |
Magic Arm | | Fully articulated arm with 90° pivoting and 360° rotating ends, an elbow that rotates 360°. It has 5/8 studs on ball joints at both ends. | Allows partial loosening for safe and precise positioning of a light head. Load Capacity 6.61 pounds |
Safety Cable | | Bundles of wire in groups of 10 | For fastening equipment in trucks for transport and on sets, to act as second safe fastener for lights attached to ceilings or overhead. |
Dollies and Dolly Accessories |
Wedges | | Set of wooden wedges in green (11), red (11), and black (11) crates. | To level out dolly track on uneven surface. |
Track Wheels for Dolly | | Set of 4 wheels to fit both American and Matthews dollies and Elemack track in purple 10 gallon storage bin with lid | To be put on dollies to ride on the dolly track |
Dolly, American | | Has 2-piece handle, 2 wings and 14 knobs. Blue (looks similar to Matthews Dolly)
| For tracking shots |
Dolly, Matthews | see above | Has 2-piece handle, 2 wings, and 10 knobs. Orange (Pictured) | For tracking shots |
Dolly, Dana | | The Dana Dolly kit includes the Dana Dolly with Mitchell base, a 75mm adapter, 100mm adapter, 150mm adapter, two track end brackets, a center support, a large washer and a multi-tool. | For Tracking shots |
Dolly, Vector | | For advanced classes only. You must take a training class to use this item. | For tracking shots, also has boom feature |
Gorillapod with Cineskates | | Gorilla pod, Cinetics skates, skateplate MAX weight is 5 Pounds! | For controlling camera movement |
Light Kits |
KinoFlo Diva |
| Diva light, Gel Frame, Louver/Silver, Lollipop with Baby Receiver, Four 3200K compact bulbs, Four 5500K compact bulbs, 1 Full flozier, 1 lamp travel case | Lighting for interviews or sets |
Lowell Rifa 250 | | Light fixture, 250 watt GCA bulb, white diffusion cloth, built-in power cable, and extension cord | Lighting for interviews or sets |
Lowell Rifa 500 | | Light fixture, 500 watt EHC bulb, white diffusion cloth, black egg crate, built-in power cable, and extension cord | Lighting for interviews or sets |
Lowell DP | | Lowell 500 watt open-faced tungsten with: barn doors single scrim half-single scrim power cable | Lighting for interviews or sets |
Mole 300 W Fresnel In-Betweenie | | 300W In-betweenie with barn doors | Lighting sets primarily |
Cowboy Softbox | | five (5) 45 watt bulbs = 2000 watt power cable softbox light control THIS IS A FRAGILE ITEM. | Lighting for interviews or sets |
Softbox | | Flashpoint SoftBox: 70 watt Fluorescent Light Unit with Built in 19.5 x 27.5 Silver Soft Box in its own fabric pouch detachable AC Plug Spiral Fluorescent 5500K Bulb (translates into 350 Watt) white diffusion cloth Lowell Light Stand | Lighting for interviews or sets |
3 Light Fluorescent Kit | | 3-7' stands, 2 umbrellas (33 shoot-thru and 33 white umbrella with black back), 1- 5.5 reflector, 2 socket kits, 2 85watt and 1 45 watt fluorescent bulb rated at 5500 degrees Kelvin. | NOTE: USE A SANDBAG SO THE LIGHT DOESNT TIP OVER |
Silverdome | | Light head, an OctoConnector, 500 watt tungsten bulb in cardboard sleeve, 1K bulb in cardboard sleeve, power cable, SilverDome softbox with four metal rods one sheet of fabric diffusion *Do NOT put lights away when hot. | Lighting for interviews or sets |
Arri 150 | | Arri 150 light with attached power cable 4-way barn door snoot hard case | Lighting for interviews or sets |
Arri 3 Open Face/Softlite Kit | | Two Arrilite 600 fixtures, one Arri 650 fixture three barn doors, three stands, three single full scrims, three double full scrims, two chimera speed rings, two Chimera XS Video Pro Lightbanks, eight metal poles, two Chimera soft fabric egg crates, one dimmer.
| Lighting for interviews or sets |
Lowell Go Kit | | 2 250W Pro lights, 2 stands, 2 barn doors, 1 umbrella, 1 gel frame. I spare bulb, case. | Lighting for interviews, some sets |
Lowell Tota Kit (Large) | | 3 tota lites, 3 AC cords, 3 stands, 1 spare bulb, 3 gel frames, 3 scissor mounts, 3 folding clamps, 3 heavy bar extension clamps, 4 flexible bar, 3 umbrellas 4 cutter, 2 scrims 1 mirrored cutter, 2 lobo clamp, 2 tota clamps, 3 L clamps, instructions | Lighting sets primarily |
Lowell Tota Kit (small) | | 3 tota light fixtures each has a scrim 3 stands 1 umbrella 3 extension cords 2 spare bulbs gel frame lobo clamp Tota clamp L-clamp scissor mount folding clamp hard case | Lighting sets primarily |
1K Open Face Strand | | Orange, 1000w light with barn door, retaining ring and clip (comes in a case with a set of 2) | Lighting sets primarily |
Teenie Weenie Kit | | 3 600W lights, 3 stands, 3 extension cords, 3 barn doors, 2 scrims, 1 spare bulb | Lighting sets primarily |
Tweenie Softie Kit | | 2 mole 650W solarspots, 2 barn doors, 2 diffuser frames, scrim bag for tweenie with 2 half single, 2 half double, 2 single, 2 double scrims. Type 2981 softlite, 1 egg crate, 1 diffuser frame, 1 scrim bag with 1 single & 1 double scrim, 3 light weight stands, molded case. | Lighting sets primarily |
Wescott Flex Light LED | | LED Light that is flexible, can be bent. Can also be mounted for stability. 1900 lux output. 1’x1’
NO BATTERY | Flexible LED lighting for interviews or lighting small spaces like inside a car. |
Battery Powered Lights |
Icelight | | Small light shaped like a lightsaber! | Lighting a small space |
Teenie Weenie Sungun | | 30V battery, DYG 250W bulb, 120v-30v cable, teenie weenie fixture, case. | Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors) |
Sungun Kit | | (2) lights attached together with attached 4-pin power cable. Comes with 12V12aH battery AND a battery charger. | Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors) |
Sungun Kit (Cine 60) | | Sungun light with battery belt. | Lighting in areas where you cannot use other lights because they need AC power. (i.e. outdoors) |
Single Lights |
650 W Open-Faced Teenie Mole | | 650 Watt open-faced teenie mole, no barndoors | Lighting sets primarily |
1K Fresnel (Type 407) | | 1000W Solarspot type 407 with yoke and barn doors Looks and performs like Cool Redhead below. The difference is the color of the fixture. The “Cool Redhead” is actually silver. While the Baby Solarspot is red. | Lighting sets primarily |
1K Fresnel Cool Readhead (Type 3081) | | 1000W Solarspot type 407 with yoke and barn doors | Lighting sets primarily |
1K Fresnel Snootable (Type 751) | | 1000W Snootable type 751 with barn doors | Lighting sets primarily |
750 Watt Softlight “Baby Soft”
| | 750W Baby soft light | Lighting sets primarily with a softer light |
1K Softlight | see above | 1000W softlight with large spud | Lighting sets primarily with a softer light |
HMI and HMI Equivalent Lights (Restricted to classes above 366K) |
200 HMI Digimole | | 1 200W HMI digimole head, 200W AC ballast, 1 4way barn door, 1 handle, molded case | Provides more powerful light than other lights on set, used to simulate daylight. |
400 HMI (PAR) | | 400W joker HMI with electronic ballast, lamp head, 25 extension cable, four leaf barn door, case on wheels | Provides more powerful light than other lights on set, used to simulate daylight. |
800 HMI (PAR) | | Joker 800W light head, electronic ballast, cable, extension cable(25 feet), four leaf barn door, super wide lens with ring, medium flood lens with a ring, frosted glass beaker, white carrying case with lens bag | Provides more powerful light than other lights on set, used to simulate daylight. |
575 HMI, Mole | | Mole HMI 575W light with ballast, barn door, and cables | Provides more powerful light than other lights on set, used to simulate daylight. |
1.2 HMI, Arri | | Arri 1.2W HMI light with ballast, barn doors, and 50’ cable. | Provides more powerful light than other lights on set, used to simulate daylight. |
1.2 HMI, Mole | see above | Mole 1.2W HMI light with ballast, barn doors, and 50’ cable. | Provides more powerful light than other lights on set, used to simulate daylight. |
Hive Killer Plasma | | Hive Killer Plasma HMI Equivalent light Kit. 1.2 HMI equivalent output 575W draw | Provides more powerful light than other lights on set, used to simulate daylight. |
Jab Daylight LED | | AadynTech Jab Daylight LED 575 HMI Equivalent Output 200W draw
Also does lightning Effects | Provides more powerful light than other lights on set, used to simulate daylight. |
Profoto 400 | | Ballast with power cable, ProFoto head with attached cable, metal transport cap *Do not put the cap on when the bulb is hot* Softlight reflector, silver reflector | Lighting for interviews or sets |
Lighting Control |
Flags and Cutter | | Cutter- 41”x10” Extra Small- 12”x18 Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Blocking out light |
Single Nets | | Extra Small- 12”x18” Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Diffusing light by 1 layer of net |
Double Nets | | Extra Small- 12”x18” Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Diffusion light by 2 layers of net |
Silks | | Extra Small- 12”x18” Small- 18”x24” Large-24”x36”
(Extra Small now in Studios)
| Diffusing light by 1 layer of silk |
¼ Stop Silks | | Small- 18”x24” Large-24”x36” | Diffusing light by ¼ layer of silk. |
Reflector, LiteDisc, 22” Silver/White | | 22” Reflector: Silver on one side, White on the other | Reflecting, blocking or diffusing light. |
Reflector, LiteDisc 32” Silver/White or Silver/Gold | see above | 32” Reflector: Silver on one side, White or Gold on the other | Reflecting, blocking or diffusing light. |
Reflector, LiteDisc 42” Translucent | see above | 42” Reflector: Translucent | Reflecting, blocking or diffusing light. |
Reflector, LiteDisc 22” or 32” 5in1 | see above | 22” or 32” Reflector: Translucent disc, silver reflector, gold reflector, silver/gold reflector and flag. | Reflecting, blocking or diffusing light. |
Reflector, LiteDisc 18” 8in1 | see above | 18” Reflector: Gold, sun fire, sunlight, silver, soft silver, white, black, and 2-stop diffuser covers | Reflecting, blocking or diffusing light. |
4 in 1 reflector (rectangle) | | 20”x30” frame with silver, gold, white and black sides. | Reflecting, blocking or diffusing light. |
Reflector Boards (2 in wooden box 24x24) | | Wooden box with two 24”x24” reflectors | Reflecting light |
Reflector Holder | | 19” to 48” collapsible Reflector Holder | To hold LiteDisc reflectors |
4x4 Butterfly Kit | | 4X4 butterfly kit includes: one 4X4 flat frame, one 4’ double net, one 52" single net, one 52" silk, one 52" flag. | Reflecting, blocking or diffusing light. |
6x6 Butterfly Kit | see above | 6X6 butterfly kit includes: one 6X6 frame (4 poles), one 6’ double net, one 6’ single net, one 6’ silk, one 6’ flag. | Reflecting, blocking or diffusing light. |
8x8 Butterfly Kit | see above | 8X8 butterfly kit includes: one 8X8 frame (4 poles), one 8’ double net, one 8’ single net, one 8’ silk, one 8’ flag. | Reflecting, blocking or diffusing light. |
Extension Cables/Studio Power Adapters |
Extension Cord, heavy duty 25’ | | 12 gage Extension Cable. Max 1500 Watts | Providing an extension for AC power. |
Extension Cord, heavy duty 50’ | see above | 12 gage Extension Cable. Max 1500 Watts | Providing an extension for AC power. |
Extension Cord, heavy duty 100’ | see above | 12 gage Extension Cable. Max 1500 Watts | Providing an extension for AC power. |
Extension Cord, extra heavy duty 50’ | see above | 10 gage Extension Cable. Max 1500 Watts | Providing an extension for AC power. |
Extension Cord, Quad (15amp Edison) | |
Welcome to the University Wiki Service! Please use your IID (yourEID@eid.utexas.edu) when prompted for your email address during login or click here to enter your EID. If you are experiencing any issues loading content on pages, please try these steps to clear your browser cache.