Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Open Davinci Resolve

image-20241014-182611.png

Click through the prompts

image-20241014-182656.png

Open the Untitled Project

image-20241014-182729.png

Click on the Media Tab at the bottom

image-20241014-182823.png

Choose your volume or hard drive from the left most column and put the interface in List View to see the media in a list

image-20241014-183022.png

Locate the folder with the media in this example footage shot with the Sony FX9 or FX6 will have a folder called XDROOT.

Right click the folder and choose

>Add Folder and SubFolders into the Media Pool

image-20241014-183807.png

Choose to Yes Change Project Frame Rate

>Click on Change

image-20241014-183725.png

Media will load into the project as shown here.

Do this for all the folders of footage / card data for the shooting days

image-20241014-183954.png

image-20241014-184159.png

Once all the footage has been added into the project click on the Edit Tab

image-20241014-184246.png

Click on List View shown here so all the clips are easily accessible

image-20241014-184400.png

Next step is to make proxies

Set where the proxy media is to be stored

image-20241014-185123.png

Select all the clips in the project that were just added and

image-20241014-184619.png

Once all the clips are selected right click the selections and choose

>Generate Proxy Media

image-20241014-184758.png

  • No labels

Confluence Documentation | Web Privacy Policy | Web Accessibility