Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Wiki created with help from Matt Lennon

First Step is you need to make a new track to put the titles on so if you have only one video track you

will add a V2 track


Go to >Timeline>New>Video Track

To Add a Title to Your Timeline

Navigate to where you want your title in your timeline. 

Mark and In point and an out point on the V2 track or the topmost track that you created

in our example it is V2

Select the Avid Titler+ button in the toolbar menu just above your timeline

Highlighted with the red square

This will apply the effect to the selected clip and open the Titler+ menu -

where you can change font type, font size/color, background color,

drop shadow angle, etc (below in red).

To change the color of the title double click on the square next to the "Face"

Then the color wheel pops up to choose the color

NOTE: If you accidentally click out of the menu and can’t find it, do the following.

First, move the playhead over the clip when the Avid Titler+ is applied.

Make sure you are in Effect Mode

Click on this icon to get into effect mode


Then, select >Tools > Avid Titler +

That will bring the menu back up.

After selecting your font type and any other starter settings,

select the T to “Add Text Field.”


Navigate over to your Program Monitor and click where you want your title to be placed.

You will get a white bounding box where you can start typing your title

NOTE: Don’t worry about the text placement fully at first.

You can always adjust the title’s location later.


Type out your title.

Add the Safe Title and Safe Action and placement guides to show you how to place the

title centered in the window.

To move the title click on the white bounding box around the title

You can drag from the corner dot or any white dot to make bigger or smaller

Also dragging with the white line will move the title around the image

To add a background to the title

Select Background and turn it ON as shown here

To change the color of the background click on the box next to the background


Double click it to open the color wheel.


To add a dissolve put your timeline cursor at the beginning of the title

Then click on the dissolve icon show in this example with the red box around it.

Note the track the dissolve is applied to

V2


Dissolve is the effect you are adding

Position option choose centered on cut or starting or ending at cut


Duration 10 or 15 frames or whatever you choose


Choose the drive that you are rendering the effect to


Choose Add and Render to apply the dissolve

  • No labels