2024-01-28 Workday Log

Philip

Suspension

Andrew

• got feedback from jacob/nathan on wishbone manufacturing plan

• trained dyn ppl on manual mill

Kadhir

Kayla

Unsprung

Gerard

• continued to prepare to manufacture axles

  • addressed all of the remaining problems with the manufacturing plan

  • finalized dimensions and tolerances

  • helped measure inner diameter of bearings and hubs

  • watched single point thread cutting videos

  • got feedback from Jacob and Nathan on plan

Steven

Sami

• Face the wishbones down to .5" → Kadhir later took over. 

• Discussed the manufacturing plan for uprights with Nathan, Jacob, and Harshit. 

• Learned how to use the Manual mill. 

Harshit

• Read Mathew's design guide about unsprung

• Got feedback from Jacob/Nathan on Uprights manufacturing plan

Steering

Luis

Anh

Katy

N/A

Evan

Frame

Kaitlyn

Josh

• Learned how to use manual mill and roughed aluminum steering stopper plate

Noah

• Trained on the manual mill by Andrew where I began the fabrication of the steering stop plate