Blackmagic Design Web Presenter - OBS and Streaming Workflow
Setup Computer #1 zoom PlayOut as the Zoom PlayOut to YouTube connect a USBC to HDMI adapter | |
Connect the HDMI out of the zoom computer to the Blackmagic Design Webpresenter HDMI input and must set the web presenter input properly | |
Then connect the USB output of the Web Presenter to the second iMac #2 that will be playing out OBS to YouTube Make sure the web presenters input is set to HDMI input Image and sound | |
Log in as commpower on both computers | |
On Computer #2 the computer connected to Blackmagic Web presenter Download and install OBS if not already after you download and install OBS, it’ll prompt you to use the Auto-Configuration Wizard. It’ll then ask you how you want to optimize the software to match your needs — it will ask if the stream is more important than a recording. In this case (a live concert), the stream was more important. This is the selection used by most. | |
Choose> Optimize for streaming recording is secondary Click Next | |
Video Settings Use Current 1920 x 1080 FPS 60, 30, but prefer 60 when possible | |
Make sure that Mic/Aux is turned all the way down or delete it?? If you have the Mic/Aux input you don't need it so you can also delete it | |
The levels can go into the yellow / red from the test speaker in zoom | |
Computer #1 zoom PlayOut Click on attendee link for for zoom session - Zoom session opens | |
Video always off | |
Zoom audio settings Microphone Built-in Microphone (Internal) Speaker HDMI BMD HDMI | |
Make Zoom Full Screen click on the Arrows that look like this in the upper right corner of zoom You will be presented with a screen that states “the webinar will begin shortly”. | |
Now just wait for it to start…. But now you can go set up the live stream,. Use the wiki in the next column | Follow this wiki for setting up YouTube Streaming |
Once the Zoom session starts on PlayOut computer #1 zoom Zoom choose interpretation of Language if necessary from the available ones - In this case we choose Spanish | |
Also make sure that you move the mouse off to the side to get rid of the DOCK on the stream | |
Then on Computer #2 To start stream click on Start Streaming in OBS wait till the stream is going then | |
Then Go Live on youtube | |
Once the session has concluded a slide with sponsor logos will be shown. I keep the stream up for about 30- sec to 1 min. Then I click the End Stream button. |
Welcome to the University Wiki Service! Please use your IID (yourEID@eid.utexas.edu) when prompted for your email address during login or click here to enter your EID. If you are experiencing any issues loading content on pages, please try these steps to clear your browser cache.