Canon Pixima TS9520 (Riso)

Always print from photoshop or adobe reader

open your image in photoshop
Go to file > print
open the canon driver by pressing the “Print Settings” button by Copies. Make sure Printer Manages Colors is checked
then do the below:

Under "Commonly Used Profiles", click on the "Standard" profile. You can also use the "riso master" profile.
Make sure "Duplex" is NOT selected.
Select "Grayscale"
Under "Media Type", select "Plain Paper" (it doesn't matter what kind of paper you're actually printing on, select "Plain Paper" regardless)
Under Paper size, check 11 x 17
Under "Print Quality", select "High" ("Standard" might work as well)

Then you should be good to go!

open your image in Adobe Reader
Go to file > print
In this first screen, make sure Print in Grayscale is checked. Make sure "Print on both sides" is UNchecked.
Then open the canon driver by pressing the “Properties” at the top.
1. then do the below:
- Under "Commonly Used Profiles", click on the "Standard" profile. You can also use the "riso master" profile.
- Make sure "Duplex" is NOT selected.
- Select "Grayscale"
- Under "Media Type", select "Plain Paper" (it doesn't matter what kind of paper you're actually printing on, select "Plain Paper" regardless)
- Under Paper size, check 11 x 17
- Under "Print Quality", select "High" ("Standard" might work as well)
Then you should be good to go!