How to Add the Raise3D Printers to Netfabb

After you install Netfabb and launch it for the first time, you must add the Raise3D printers.

Step-by-step guide

Launch Netfabb
Click "Add Machine"
Click "Create Custom Parameters"
Enter "Raise3D Pro3" for the Machine Name
1. "Raise3D" for the Manufacturer
2. The Process Parameters are 300mm X 300mm X 300mm
3. Click "Save Machine"
Repeat steps 2 & 3 to ADD Raised 3D Pro3 Plus machines
Enter "Raise3D Pro3 Plus" for the Machine Name
1. "Raise3D" for the Vendor
2. The Process Parameters are 300mm X 300mm X 605mm
3. Click "Save Machine"
Now you're ready to learn How to Perform the Netfabb Test