Skip to end of metadata
Go to start of metadata
| Connect the lighting fixture to the lighting grid or findthe fixture on the grid that you want to turn on.
Locate where the fixture is plugged in by following the cable up to the numbered square.
In this picture example, the light fixture is plugged into circuit "73" |
| On the Strand Lighting Board,
Press F3 to get into the Setup menu |
| Press the "Right" arrow to navigate to Menu #9 Press F3 to Select the "9. Console default" |
|
Press F2 to confirm "Yes" and reset the defaults |
| Press F1 to "ESC" and get back to the home page Press F3 for Setup |
| Choose "1. Patch" Then press F3 to select |
| Choose "1. Edit Patch" Then press F3 to select
|
| "73@40" and follow that by pressing the asterisk key ( * ) |
| Asterisk key is the same as "enter" to confirm the dimmer assignment |
Make sure that the scene mode is in
"Single Scene" seems to work the best
![](https://cloud.wikis.utexas.edu/wiki/download/thumbnails/33424541/image2018-2-5%2012:0:33.png?version=1&modificationDate=1517832034000&cacheVersion=1&api=v2&width=400&height=450)
Preset A should be up | |
| Make sure Grand Master is also upon the slider position |
TROUBLE SHOOTING TIP
Pressing "scene mode" over and over with Preset A and Grand Master up then that will toggle on the lights if they don't come on AT FIRST TRY.
| To see the settings of the circuits click the ESC or F1 key till the"Main Menu" appears then click F3 or Setup to display the patch menu. Arrow right to select the "2nd"setting then click Select or F3 to select the Display Patch menu. |
| The patch settings will appear per dimmer and by selecting the "right" arrow keypatched to that controllable dimmer.
This example shows Circuit 44 and Circuit 80 are both controlled by channel fader #44on the Strand Dimmer Board |