To obtain L0 status as UT, DMS or UTHA support staff:
1) Submit the BIC MRI Training Request form.
2) Download the Level 0 MRI User Training Packet from the BIC Wiki and complete under the guidance of your PI / supervisor.
This packet has 4 components:
- Completion of the first page of the packet PDF. Must have your signature and the signature of your PI/faculty advisor.
- A screenshot of UTLearn course certification:
- BIC-MRI: 101A (for the 3T Skyra / NHB) or
- BIC-MRI: 101B (for the 3T Vida / HDB).
- A screenshot of email confirmation for a completed MRI Safety Screening form for Personnel. A member of BIC staff will review and email back confirmation if you screen safe. Re-submit this if your details have changed, or if it has been more than 2 years since last submission.
- IRB (human subject studies) or IACUC (pre-clinical studies) status – Not Required for Support Staff.
3) Compile each component of the packet into a single PDF. Name the completed Training Packet as your FIRSTNAME_LASTNAME_L0.pdf. Email your PDF to bic-training@utlists.utexas.edu
4) BIC will review the packet and will grant Level 0 status providing all requirements have been met.
Note: Level 0 support staff can enter the MRI Control Room (Zone 3) ONLY and MAY NOT enter the MRI Scanner Room (Zone 4) under ANY CIRCUMSTANCES unless they are accompanied by a member of BIC staff or a certified MRI Technologist.
Restricted card access to BIC facilities may be granted depending on your role.