2020 Running batch jobs at TACC

Reservations

Use our summer school reservation (intro_NGS) when submitting batch jobs to get higher priority on the Lonestar5 normal queue during this course:

sbatch --reservation=intro_NGS <batch_file>.slurm

Note that a reservation is different from the TACC allocation/project for this class, which is UT-2015-05-18.

Compute cluster overview

When you SSH into ls5, your session is assigned to one of a small set of login nodes (also called head nodes). These are not the compute nodes that will run your jobs.

Think of a node as a computer, like your laptop, but probably with more cores and memory. Now multiply that computer a thousand or more, and you have a cluster.

The small set of login nodes are a shared resource (type the users command to see everyone currently logged in) and are not meant for running interactive programs – for that you submit a description of what you want done to a batch system, which farms the work out to one or more compute nodes.

On the other hand, the login nodes are intended for copying files to and from TACC, so they have a lot of network bandwidth while compute nodes have limited network bandwidth.

So follow these guidelines:

  • Do not perform substantial computation on the login nodes.
    • They are closely monitored, and you will get warnings from the TACC admin folks!
    • Code is usually developed and tested somewhere other than TACC, and only moved over when pretty solid.
  • Do not perform significant network access from your batch jobs.
    • Instead, stage your data onto $SCRATCH from a login node before submitting your job.

Lonestar5 and Stampede2 overview and comparison

Here is a comparison of the configurations and ls5 and stampede2. As you can see, stampede2 is the larger cluster, launched in 2017.


ls5stampede2
login nodes

6

20 cores each
128 GB memory

6

28 cores each
128 GB memory

standard compute nodes

1,252

24 cores per node (48 virtual)
64 GB memory

4,200 KNL (Knights Landing)

  • 68 cores per node (272 virtual)
  • 96 GB memory

1,736 SKX (Skylake)

  • 48 cores per node (96 virtual)
  • 192 GB memory
large memory nodes

10 total

2 w/1 TB memory, 48 cores
8 w/512 GB RAM, 32 cores

--
batch systemSLURMSLURM
maximum job run time48 hours

96 hours on KNL nodes

48 hours on SKX nodes

Note the use of the term virtual core above. Compute cores are standalone processors – mini CPUs, each of which can execute separate sets of instructions. However modern cores may also have hyper-threading enabled, where a single core can appear as more than one virtual processor to the Operating system (see https://en.wikipedia.org/wiki/Hyper-threading for more on hyper-threading). For example, Lonestar5 nodes have 2 hyperthreads (HTs) per core. So with 2 HTs for each of the 24 physical cores, each node has a total of 48 virtual cores.

User guides for ls5 and stampede2 can be found at:

Unfortunately, the TACC user guides are aimed towards a different user community – the weather modelers and aerodynamic flow simulators who need very fast matrix manipulation and other high performance computing (HPC) features. The usage patterns for bioinformatics – generally running 3rd party tools on many different datasets – is rather a special case for HPC. TACC calls our type of processing "parameter sweep jobs" and has a special process for running them, using ther launcher module.

Software at TACC

Programs and your $PATH

When you type in the name of an arbitrary program (ls for example), how does the shell know where to find that program? The answer is your $PATH. $PATH is a pre-defined environment variable whose value is a list of directories.The shell looks for program names in that list, in the order the directories appear.

To determine where the shell will find a particular program, use the which command:

Using which to search $PATH
which rsync
which cat

The module system

The module system is an incredibly powerful way to have literally thousands of software packages available, some of which are incompatible with each other, without causing complete havoc. The TACC staff builds the desired package from source code in well-known locations that are NOT on your $PATH. Then, when a module is loaded, its binaries are added to your $PATH.

For example, the following module load command makes the bwa aligner available to you:

How module load affects $PATH
# first type "bwa" to show that it is not present in your environment:
bwa
# it's not on your $PATH either:
which bwa

# now add bwa to your environment and try again:
module load bwa
bwa
# and see how it's now on your $PATH:
which bwa
# you can see the new directory at the front of $PATH
echo $PATH

# to remove it, use "unload"
module unload bwa
bwa
# gone from $PATH again...
which bwa

module spider

These days the TACC module system includes hundreds of useful bioinformatics programs. To see if your favorite software package has been installed at TACC, use module spider:

module spider fastqc
module spider samtools
module spider bedtools

TACC BioContainers modules

It is quite a large systems administration task to install software at TACC and configure it for the module system. As a result, TACC was always behind in making important bioinformatics software availble. To address this problem, TACC moved to providing bioinformatics software via containers, which are virtual machines like VMware and Virtual Box, but are lighter weight: they require less disk space because they rely more on the host's base Linux environment. Specifically, TACC (and many other High Performance Computing clusters) use Singularity containers, which are similar to Docker containers but are more suited to the HPC environment (in fact one can build a Docker container then easily convert it to Singularity for use at TACC).

TACC obtains its containers from BioContainers (https://biocontainers.pro/ and https://github.com/BioContainers/containers), a large public repository of bioinformatics tool Singularity containers. This has allowed TACC to easily provision thousands of such tools!

These BioContainers are not visible in TACC's "standard" module system, but only after the master biocontainers module is loaded:

# Make sure the non-biocontainers version of bwa is not loaded
module unload bwa
# Verify that bwa is not available
bwa

# Verify that these programs are not in the standard TACC module system
module spider kallisto
module spider bowtie2
module spider minimap2
module spider multiqc
module spider GATK
module spider velvet

# Load the Biocontainers master module (this takes a while)
module load biocontainers

# Now look for those programs
module spider kallisto
module spider bowtie2
module spider minimap2
module spider multiqc
module spider GATK
module spider velvet

Notice how the BioContainers module names have "ctr" in their names, version numbers, and other identifying information.

loading a biocontainer module

Once the biocontainers module has been loaded, you can just load the desired tool module, as with the kallisto pseudo-aligner program below.

# Load the Biocontainers master module 
module load biocontainers

# Load the default kallisto biocontainer 
module load kallisto

# Verify you can now execute kallisto
kallisto

Note that loading a BioContainer does not add anything to your $PATH. Instead, it defines an alias, which is just a shortcut for executing the command. You can see the alias definition using the type command. And you can ensure the program is available using the command -v utility.

# Note that kallisto has not been added to your $PATH
which kallisto

# Instead, an alias has been defined. Use type to see its definition
type kallisto

# Ensure kallisto is available with command -v
command -v kallisto

installing custom software

Even with all the tools available at TACC, inevitably you'll need something they don't have. In this case you can build the tool yourself and install it in a local TACC directory. While building 3rd party tools is beyond the scope of this course, it's really not that hard. The trick is keeping it all organized.

For one thing, remember that your $HOME directory quota is fairly small (10 GB on ls5), and that can fill up quickly if you install many programs. We recommend creating an installation area in your $WORK directory and installing programs there. You can then make symbolic links to the binaries you need in your $HOME/local/bin directory (which was added to your $PATH in your .bashrc).

See how we used a similar trick to make the launcher_creator.py program available to you. Using the ls -l option shows you where symbolic links point to:

Real location of launcher_creator.py
ls -l ~/local/bin
 Where is the real launcher_creator.py script?

/work/projects/BioITeam/common/bin/launcher_creator.py

$PATH caveat

Remember that the order of locations in the $PATH environment variable is the order in which the locations will be searched. In particular, the module load command adds to the front of your path. This can mask similarly-named programs, for example, in your $HOME/local/bin directory.

Job Execution

Job execution is controlled by the SLURM batch system on both ls5 and stampede2.

To run a job you prepare 2 files:

  1. a commands file file containing the commands to run, one command per line (<job_name>.cmds)
  2. a job control file that describes how to run the job (<job_name>.slurm)

The process of running the job involves these steps:

  1. Create a commands file containing exactly one command per line.
  2. Prepare a job control file for the commands file that describes how the job should be run.
  3. You submit the job control file to the batch system. The job is then said to be queued to run.
  4. The batch system prioritizes the job based on the number of compute nodes needed and the job run time requested.
  5. When compute nodes become available, the job tasks (command lines in the <job_name>.cmds file) are assigned to one or more compute nodes and begin to run in parallel.
  6. The job completes when either:
    1. you cancel the job manually
    2. all tasks in the job complete (successfully or not!)
    3. the requested job run time has expired

SLURM at a glance

Here are the main components of the SLURM batch system.


ls5, stampede2
batch systemSLURM
batch control file name<job_name>.slurm
job submission commandsbatch <job_name>.slurm
job monitoring commandshowq -u
job stop commandscancel -n <job name>

Simple example

Let's go through a simple example. Execute the following commands to copy a pre-made simple.cmds commands file:

Copy simple commands
mkdir -p $SCRATCH/core_ngs/slurm/simple
cd $SCRATCH/core_ngs/slurm/simple
cp $CORENGS/tacc/simple.cmds .

What are the tasks we want to do? Each task corresponds to one line in the simple.cmds file, so let's take a look at it using the cat (concatenate) command that simply reads a file and writes each line of content to standard output (here, your Terminal):

View simple commands
cat simple.cmds

The tasks we want to perform look like this:

echo "Command 1 on `hostname` - `date`" > cmd1.log 2>&1
echo "Command 2 on `hostname` - `date`" > cmd2.log 2>&1
echo "Command 3 on `hostname` - `date`" > cmd3.log 2>&1
echo "Command 4 on `hostname` - `date`" > cmd4.log 2>&1
echo "Command 5 on `hostname` - `date`" > cmd5.log 2>&1
echo "Command 6 on `hostname` - `date`" > cmd6.log 2>&1
echo "Command 7 on `hostname` - `date`" > cmd7.log 2>&1
echo "Command 8 on `hostname` - `date`" > cmd8.log 2>&1

There are 8 tasks. Each is a simple echo command that just outputs string containing the task number and date to a different file.

Use the handy launcher_creator.py program to create the job submission script.

Create batch submission script for simple commands
launcher_creator.py -j simple.cmds -n simple -t 00:00:05 -w 8 -a UT-2015-05-18 -q development

You should see output something like the following, and you should see a simple.slurm batch submission file in the current directory.

Project simple.
Using job file simple.cmds.
Using development queue.
For 00:00:05 time.
Using UT-2015-05-18 allocation.
Not sending start/stop email.
Launcher successfully created. Type "sbatch simple.slurm" to queue your job.

Submit your batch job like this, then check the batch queue to see the job's status.

Submit simple job to batch queue
sbatch --reservation=intro_NGS simple.slurm
showq -u

If you're quick, you'll see a queue status something like this:

SUMMARY OF JOBS FOR USER: <abattenh>

ACTIVE JOBS--------------------
JOBID     JOBNAME    USERNAME      STATE   NODES REMAINING STARTTIME
================================================================================
2916562   simple     abattenh      Running 1      0:00:57  Sat Jun 13 13:52:32

WAITING JOBS------------------------
JOBID     JOBNAME    USERNAME      STATE   NODES WCLIMIT   QUEUETIME
================================================================================

Total Jobs: 1     Active Jobs: 1     Idle Jobs: 0     Blocked Jobs: 0

If you don't see your simple job in either the ACTIVE or WAITING sections of your queue, it probably already finished – it should only run for a second or two!

Notice in my queue status, where the STATE is Running, there is only one node assigned. Why is this, since there were 8 tasks?

Every job, no matter how few tasks requested, will be assigned at least one node. Each ls5 node has 24 physical cores, so each of the 8 tasks can be assigned to a core.

Exercise: What files were created by your job?

 Answer

ls should show you something like this:

cmd1.log  cmd3.log  cmd5.log  cmd7.log  simple.cmds      simple.o2916562
cmd2.log  cmd4.log  cmd6.log  cmd8.log  simple.e2916562  simple.slurm

The newly created files are the .log files, as well as error and output logs simple.e2916562 and simple.o2916562.

filename wildcarding

Here's a cute trick for viewing the contents all your output files at once, using the cat command and filename wildcarding.

Multi-character filename wildcarding
cat cmd*.log

The cat command actually takes a list of one or more files (if you're giving it files rather than standard input – more on this shortly) and outputs the concatenation of them to standard output. The asterisk ( * ) in cmd*.log is a multi-character wildcard that matches any filename starting with cmd then ending with .log. So it would match cmd_hello_world.log.

You can also specify single-character matches inside brackets ( [ ] ) in either of the ways below, this time using the ls command so you can better see what is matching:

Single character filename wildcarding
ls cmd[12345678].log
ls cmd[1-8].log

This technique is sometimes called filename globbing, and the pattern a glob. Don't ask me why – it's a Unix thing. Globbing – translating a glob pattern into a list of files – is one of the handy thing the bash shell does for you. (Read more about Wildcards and special filenames.)

Exercise: How would you list all files starting with simple?

 Answer
ls simple*

Here's what my cat output looks like. Notice the times are all nearly the same because all the tasks ran in parallel. That's the power of cluster computing!

Command 1 on nid00022 - Sat Jun 13 13:52:52 CDT 2020
Command 2 on nid00022 - Sat Jun 13 13:52:47 CDT 2020
Command 3 on nid00022 - Sat Jun 13 13:52:58 CDT 2020
Command 4 on nid00022 - Sat Jun 13 13:52:53 CDT 2020
Command 5 on nid00022 - Sat Jun 13 13:52:41 CDT 2020
Command 6 on nid00022 - Sat Jun 13 13:52:49 CDT 2020
Command 7 on nid00022 - Sat Jun 13 13:52:40 CDT 2020
Command 8 on nid00022 - Sat Jun 13 13:52:48 CDT 2020

echo

Lets take a closer look at a typical task in the simple.cmds file.

An echo command
echo "Command 3 `date`" > cmd3.log 2>&1

The echo command is like a print statement in the bash shell. Echo takes its arguments and writes them to one line of standard output. While not always required, it is a good idea to put the output string in double quotes.

backtick evaluation

So what is this funny looking `date` bit doing? Well, date is just another Linux command (try just typing it in). Here we don't want the shell to put the string "date" in the output, we want it to execute the date command and put the result text into the output. The backquotes ( ` ` also called backticks) around the date command tell the shell we want that command executed and its output substituted into the string. (Read more about Quoting in the shell.)

Backtick evaluation
# These are equivalent:
date
echo `date`

# But different from this:
echo date

output redirection

There's still more to learn from one of our simple tasks, something called output redirection:

echo "Command 3 `date`" > cmd3.log 2>&1

Normally echo writes its string to standard output. If you invoke echo in an interactive shell like Terminal, standard output is displayed to the Terminal window.


Usually we want to separate the outputs of all our commands. Why is this important? Suppose we run a job with 100 commands, each one a whole pipeline (alignment, for example). 88 finish fine but 12 do not. Just try figuring out which ones had the errors, and where the errors occurred, if all the normal output is in one intermingled file and all the error in another intermingled file!

So in the above example the first '>' says to redirect the standard output of the echo command to the cmd3.log file. The '2>&1' part says to redirect standard error to the same place. Technically, it says to redirect standard error (built-in Linux stream 2) to the same place as standard output (built-in Linux stream 1); and since standard output is going to cmd3.log, any standard error will go there also. (Read more about Standard I/O streams.)

So what happens when output is generated by tasks in a batch job? Well, you may have noticed the files with names like simple.e2916562 and simple.o2916562 were created by your job. simple.o2916562 contains all standard output and simple.o2916562 contains all standard error generated by your tasks that was not redirected elsewhere, as well as information relating to running your job and its tasks.

Job parameters

Now that we've executed a really simple job, let's take a look at some important job submission parameters. These correspond to arguments to the launcher_creator.py script.

A bit of background. Historically, TACC was set up to cater to researchers writing their own C or Fortran codes highly optimized to exploit parallelism (the HPC crowd). Much of TACC's documentation is aimed at this audience, which makes it difficult to pick out the important parts for us.

The kind of jobs we biologists generally run are relatively new to TACC. They even have a special name for them:  "parametric sweeps", by which they mean the same program running on different data sets.

In fact there is a special software module required to run our jobs, called the launcher module. You don't need to worry about activating the launcher module – that's done by the <job_name>.slurm script created by launcher_creator.py like this:

module load launcher

The launcher module knows how to interpret various job parameters in the <job_name>.slurm batch SLURM submission script and use them to create your job and assign its tasks to compute nodes. Our launcher_creator.py program is a simple Python script that lets you specify job parameters and writes out a valid <job_name>.slurm submission script.

launcher_creator.py

If you call launcher_creator.py with no arguments it gives you its usage description:

launcher_creator.py usage
usage: launcher_creator.py [-h] -n NAME -t TIME_REQUEST [-j JOB_FILE]
                           [-b SHELL_COMMANDS] [-B SHELL_COMMANDS_FILE]
                           [-q QUEUE] [-a [ALLOCATION]] [-m MODULES]
                           [-M MODULES_FILE] [-w WAYNESS] [-N NUM_NODES]
                           [-e [EMAIL]] [-l LAUNCHER] [-s]

Create launchers for TACC clusters. Report problems to rt-other@ccbb.utexas.edu

optional arguments:
  -h, --help            show this help message and exit

Required:
  -n NAME, --name NAME  The name of your job.
  -t TIME_REQUEST, --time TIME_REQUEST
                        The time you want to give to your job. Format:
                        hh:mm:ss

Commands:
  You must use at least one of these options to submit your commands for
  TACC.

  -j JOB_FILE, --jobs JOB_FILE
                        The name of the job file containing your commands.
  -b SHELL_COMMANDS, --bash SHELL_COMMANDS
                        A string of shell (Bash, zsh, etc) commands that are
                        executed before any parametric jobs are launched.
  -B SHELL_COMMANDS_FILE, --bash_file SHELL_COMMANDS_FILE
                        A file containing shell (Bash, zsh, etc) commands that
                        are executed before any parametric jobs are launched.

Optional:
  -q QUEUE, --queue QUEUE
                        The TACC allocation for job submission.
                        Default="development"
  -a [ALLOCATION], -A [ALLOCATION], --allocation [ALLOCATION]
                        The TACC allocation for job submission. You can set a
                        default ALLOCATION environment variable.
  -m MODULES, --modules MODULES
                        A list of module commands. The "launcher" module is
                        always automatically included. Example: -m "module
                        swap intel gcc; module load bedtools"
  -M MODULES_FILE, --modules_file MODULES_FILE
                        A file containing module commands.
  -w WAYNESS, --wayness WAYNESS
                        Wayness: the number of commands you want to give each
                        node. The default is the number of cores per node.
  -N NUM_NODES, --num_nodes NUM_NODES
                        Number of nodes to request. You probably don't need
                        this option. Use wayness instead. You ONLY need it if
                        you want to run a job list that isn't defined at the
                        time you submit the launcher.
  -e [EMAIL], --email [EMAIL]
                        Your email address if you want to receive an email
                        from Lonestar when your job starts and ends. Without
                        an argument, it will use a default EMAIL_ADDRESS
                        environment variable.
  -l LAUNCHER, --launcher_name LAUNCHER
                        The name of the launcher script that will be created.
                        Default="<name>.slurm"
  -s                    Echoes the launcher filename to stdout.

Because it is a long help message, we may want to pipe the output to more, a pager that displays one screen of text at a time. Type the spacebar to advance to the next page, and Ctrl-c to exit from more.

Get usage information for launcher_creator.py
# Use spacebar to page forward; Ctrl-c to exit
launcher_creator.py -h | more
 Advanced SLURMing

The launcher_creator.py script does not handle every job control parameter you might ever want to set. For that, make a copy of the default script, found at $LAUNCHER_DIR/extras/batch-scripts/launcher.slurm, and edit it appropriately.

To read more about the launcher module:

module load launcher
module help launcher
more $LAUNCHER_DIR/README

job name and commands file

Recall how the simple.slurm batch file was created:

Create batch submission script for simple commands
launcher_creator.py -j simple.cmds -n simple -t 00:00:05 -w 8 -a UT-2015-05-18 -q developmen
  • The name of your commands file is given with the -j simple.cmds argument.
  • Your desired job name is given with the -n <job_name> argument.
    • The <job_name> (here simple) is the job name you will see in your queue.
    • By default a corresponding <job_name>.slurm batch file is created for you.
      • It contains the name of the commands file that the batch system will execute.

queues and runtime

TACC resources are partitioned into queues: a named set of compute nodes with different characteristics. The major ones on ls5 are listed below. Generally you use development (-q development) when you are writing and testing your code, then normal once you're sure your commands will execute properly.

queue namemaximum runtimepurpose
development2 hrsdevelopment (short queue wait times)
normal48 hrsnormal priority (queue waits can sometimes be long)
largemem48 hrslarge memory jobs
  • In launcher_creator.py, the queue is specified by the -q argument.
    • The default queue is development. Specify -q normal for normal queue jobs.
  • The maximum runtime you are requesting for your job is specified by the -t argument.
    • Format is hh:mm:ss
    • Note that your job will be terminated without warning at the end of its time limit!

allocation and SUs

You may be a member of a number of different projects, hence have a choice which allocation to run your job under.

  • You specify that allocation name with the -a argument of launcher_maker.py.
  • If you have set an $ALLOCATION environment variable to an allocation name, it will be used if you are a member of only one TACC project.
 Our class ALLOCATION was set in .bashrc

The .bashrc login script you've installed for this course specifies the class's allocation as shown below. Note that this allocation will expire after the course, so you should change that setting appropriately at some point.

ALLOCATION setting in .bashrc
# This sets the default project allocation for launcher_maker.py
export ALLOCATION=UT-2015-05-18
  • When you run a batch job, your project allocation gets "charged" for the time your job runs, in the currency of SUs (System Units).
  • SUs are related in some way to node hours.

Jobs tasks should have similar expected runtimes

Jobs should consist of tasks that will run for approximately the same length of time. This is because the total node hours for your job is calculated as the run time for your longest running task (the one that finishes last).

For example, if you specify 64 commands and 99 finish in 2 seconds but one runs for 24 hours, you'll be charged for 64 x 24 node hours even though the total amount of work performed was only ~24 hours.

wayness (tasks per node)

One of the most confusing things in job submission is the parameter called wayness, which controls how many tasks are run on each computer node.

  • Recall that there are 24 physical (48 virtual) cores and 64 GB of memory on each compute node
    • so technically you can run up to 48 commands on a node, each with ~1.3 GB available memory
    • you can run fewer tasks, and if you do, each task gets more resources
  • Because bioinformatics programs generally require more memory and fewer cores, launcher_creator.py sets a 24 cores/node maximum.
tasks per node (wayness)cores available to each taskmemory available to each task
12464 GB
21232 GB
3821.3 GB
4616 GB
6410.6 GB
838 GB
1225.3 GB
2412.6 GB
  • In launcher_creator.py, wayness is specified by the -w argument.
    • the default is 24 (one task per core)
  •  A special case is when you have only 1 command in your job.
    • In that case, it doesn't matter what wayness you request.
    • Your job will run on one compute node, and have all 24 cores available.

Your choice of the wayness parameter will depend on the nature of the work you are performing: its computational intensity, its memory requirements and its ability to take advantage of multi-processing/multi-threading (e.g. bwa -t option or tophat -p option).

Wayness example

Let's use launcher_creator.py to explore wayness options. First copy over the wayness.cmds commands file:

Copy wayness commands
cds
mkdir -p core_ngs/slurm/wayness
cd core_ngs/slurm/wayness
cp $CORENGS/tacc/wayness.cmds .

Exercise: How many tasks are specified in the wayness.cmds file?

 Hint

wc --help

 Answer

Find the number of lines in the wayness.cmds commands file:

ALLOCATION setting in .bashrc
wc -l wayness.cmds

The file has 24 lines, representing 24 tasks.

The wayness.cmds commands file consists of a number of identical lines that look like this:

sleep 3; echo "Command $LAUNCHER_JID of $LAUNCHER_NJOBS ($LAUNCHER_PPN per node) ran on node `hostname` core $LAUNCHER_TSK_ID." > cmd.$LAUNCHER_JID.log 2>&1
 What's going on?

The wayness commands take advantage of a number of environment variables the launcher module system sets automatically for each task:

  • $LAUNCHER_JID – the task number of the running task (from 1 to total number of tasks)
  • $LAUNCHER_NJOBS– total number of tasks specified by the job
  • $LAUNCHER_TSK_ID – number of the core running the task (0 to number of tasks - 1)
  • hostname – Linux program that returns the name of the current compute node

For more information, see https://github.com/TACC/launcher

Create the batch submission script specifying a wayness of 8 (8 tasks per node), then submit the job and monitor the queue:

Create batch submission script for wayness example
launcher_creator.py -j wayness.cmds -n wayness -w 8 -t 00:00:20 -a UT-2015-05-18
sbatch --reservation=intro_NGS wayness.slurm
showq -u

Exercise: With 24 tasks requested and wayness of 8, how many nodes will this job require? How much memory will be allocated to each task?

 Answer

3 nodes (24 tasks x 1 node/8 tasks)
16 GB (64 GB/node * 1 node/8 tasks)

 Exercise: If you specified a wayness of 2, how many nodes would this job require? How much memory could each task use?

 Answer

12 nodes (24 tasks x 1 node/2 tasks)
32 GB (64 GB/node * 1 node/2 tasks)

Look at the output file contents once the job is done.

cat cmd*log

# or, for a listing ordered by command number (the 2nd field, a number)
cat cmd*log | sort -k 2,2n

You should see something like output below.

Command 1 of 24 (8 per node) ran on node nid00020 core 0.
Command 2 of 24 (8 per node) ran on node nid00020 core 1.
Command 3 of 24 (8 per node) ran on node nid00020 core 2.
Command 4 of 24 (8 per node) ran on node nid00020 core 3.
Command 5 of 24 (8 per node) ran on node nid00020 core 4.
Command 6 of 24 (8 per node) ran on node nid00020 core 5.
Command 7 of 24 (8 per node) ran on node nid00020 core 6.
Command 8 of 24 (8 per node) ran on node nid00020 core 7.
Command 9 of 24 (8 per node) ran on node nid00021 core 8.
Command 10 of 24 (8 per node) ran on node nid00021 core 9.
Command 11 of 24 (8 per node) ran on node nid00021 core 10.
Command 12 of 24 (8 per node) ran on node nid00021 core 11.
Command 13 of 24 (8 per node) ran on node nid00021 core 12.
Command 14 of 24 (8 per node) ran on node nid00021 core 13.
Command 15 of 24 (8 per node) ran on node nid00021 core 14.
Command 16 of 24 (8 per node) ran on node nid00021 core 15.
Command 17 of 24 (8 per node) ran on node nid00022 core 16.
Command 18 of 24 (8 per node) ran on node nid00022 core 17.
Command 19 of 24 (8 per node) ran on node nid00022 core 18.
Command 20 of 24 (8 per node) ran on node nid00022 core 19.
Command 21 of 24 (8 per node) ran on node nid00022 core 20.
Command 22 of 24 (8 per node) ran on node nid00022 core 21.
Command 23 of 24 (8 per node) ran on node nid00022 core 22.
Command 24 of 24 (8 per node) ran on node nid00022 core 23.

Notice that there are 3 different host names, each of which ran 8 tasks:

cat cmd*log | awk '{print $11}' | sort | uniq -c

should produce this output (read more about piping commands to make a histogram)

      8 nid00020
      8 nid00021
      8 nid00022

Some best practices

Redirect task output and error streams

We've already touched on the need to redirect standard output and standard error for each task. Just remember that funny redirection syntax:

my_program input_file1 output_file1 > file1.log 2>&1

Combine serial workflows into scripts

Another really good way to work is to "bundle" a complex set of steps into a shell script that sets up its own environment, loads its own modules, then executes a series of program steps. You can then just call that script, probably with data-specific arguments, in your commands file. This multi-program script is sometimes termed a pipeline, although complex pipelines may involve several such scripts.

For example, you might have a script called align_bwa.sh (a bash script) or align_bowtie2.py (written in python) that performs multiple steps needed during the alignment process:

  • quality checking the input FASTQ file
  • trimming or removing adapters from the sequences
  • performing the alignment step(s) to create a BAM file
  • sort the BAM file
  • index the BAM file
  • gather alignment statistics from the BAM file

The BioITeam maintains a set of such scripts in the /work/projects/BioITeam/common/script directory. Take a look at some of them after you feel more comfortable with initial NGS processing steps. They can be executed by anyone with a TACC account.

Use one directory per job

You may have noticed that all the files involved in our job were in one directory – the batch submissions file, commands file, log files our tasks wrote, and the launcher job output and error files. Of course you'll probably need input files too (wink) as well as output files.

Because a single job can create a lot of files, it is a good idea to use a different directory for each job or set of closely related jobs, maybe with a name similar to the job being performed. This will help you stay organized.

Here's an example directory structure

$SCRATCH/my_project
             /original      # contains or links to original fastq files
             /fastq_prep    # run fastq QC and trimming jobs here
             /alignment     # run alignment jobs here
             /gene_counts   # analyze gene overlap here
             /test1         # play around with stuff here
             /test2         # play around with other stuff here

Command files in each directory can refer to files in other directories using relative path syntax, e.g.:

Relative path syntax
cd $SCRATCH/my_project/fastq_prep
ls ../original/my_raw_sequences.fastq.gz

Or create a symbolic link to the directory and refer to it as a sub-directory:

Symbolic link to relative path
cd $SCRATCH/my_project/fastq_prep
ln -s ../original fq
ls ./fq/my_raw_sequences.fastq.gz

relative path syntax

As we have seen, there are several special "directory names" the bash shell understands:

  • "dot directory" ( . ) refers to "here" or "the current directory"
  • "dot dot directory" ( .. ) refers to "one directory up"
  • "tilde directory" ( ~ ) refers to your home directory

Try these relative path examples:

Relative path exercise
cd $SCRATCH/core_ngs/slurm/simple
ls ../wayness
ls ../..
ls -l ~/.bashrc

Interactive sessions (idev)

So we've explored the TACC batch system. What if you want to do some interactive-style testing of your workflow?

Interactive sessions are available through the idev command as shown below. idev sessions are configured with similar parameters to batch jobs.

Start an idev session
idev -p development -m 20 -A UT-2015-05-18 -N 1 -n 24 --reservation=intro_NGS

Notes:

  • -p development requests nodes on the development queue
  • -m 20 asks for a 20-minute session (120 minutes is the maximum for development)
  • -A UT-2015-05-18 specifies the TACC allocation/project to use
  • -N 1 asks for 1 node and -n 24 requests access to 24 cores
  • --reservation=intro_NGS gives us priority access to TACC nodes for the class. You normally won't use this argument.

When you ask for an idev session, you'll see output as shown below. Note that the process may pause while it waits for available nodes.

 -> Defaults file    : ~/.idevrc
 -> System           : ls5
 -> Queue            : development   (cmd line: -p        )
 -> Nodes            : 1             (cmd line: -N        )
 -> Total tasks      : 24            (cmd line: -n        )
 -> Time (minutes)   : 20            (cmd line: -m        )
 -> Project          : UT-2015-05-1  (cmd line: -A        )

-----------------------------------------------------------------
          Welcome to the Lonestar 5 Supercomputer
-----------------------------------------------------------------

No reservation for this job
--> Verifying valid submit host (login2)...OK
--> Verifying valid jobname...OK
--> Enforcing max jobs per user...OK
--> Verifying availability of your home dir (/home1/01063/abattenh)...OK
--> Verifying availability of your work dir (/work/01063/abattenh/lonestar)...OK
--> Verifying availability of your scratch dir (/scratch/01063/abattenh)...OK
--> Verifying valid ssh keys...OK
--> Verifying access to desired queue (development)...OK
--> Verifying job request is within current queue limits...OK
--> Checking available allocation (UT-2015-05-18)...OK
Submitted batch job 1579644

 -> After your idev job begins to run, a command prompt will appear,
 -> and you can begin your interactive development session.
 -> We will report the job status every 4 seconds: (PD=pending, R=running).

 ->job status:  PD
 ->job status:  R

 -> Job is now running on masternode= nid00011...OK
 -> Sleeping for 7 seconds...OK
 -> Checking to make sure your job has initialized an env for you....OK
 -> Creating interactive terminal session (login) on master node nid00011.

Warning: Permanently added '[nid00011]:6999,[10.128.0.12]:6999' (RSA) to the list of known hosts

Once the idev session has started, it looks quite similar to a login node environment, except for these differences:

  • the hostname command on a login node will return a login server name like login2
    • while in an idev session hostname returns a compute node name like nid00011
  • you cannot submit a batch job from inside an idev session, only from a login node
  • your idev session will end when the requested time has expired
    • or you can just type exit to return to a login node session