Controls Backup Camera Set-up Guide
This guide is following the setup for the generic camera we copped off Amazon (link: https://www.amazon.com/dp/B0BWQ7KQDM)
The actual manual is relatively jank and we have lost some parts so guide will serve as a mediocre replacement.
Parts
The following will be needed to set the camera up:
DC Power Supply and Alligator Clips as needed (near/on the shelf)
Associated Display
Yellow Component Cable
Associated Camera
DC Barrel Jack Cable
Assembly
This diagram summarizes how it should be connected.
The best operating voltage is 12 V for both the camera and display. It will work at a minimum of 7 V though.