12.4 Implementation

For our final design, we decided on a mechanism that uses a system of connecting links to mechanically couple the vertical motion of the four-bar rocker to the clamping motion of the claw. As the rocker moves through its range of motion, a secondary linkage transmits this motion to a sliding T-bar within the claw assembly. This converts the rotational motion of the rocker into linear motion of the slider, which in turn actuates the opening and closing of the claw jaws.

Connecting Rods to Combine Motions

Open

Solidworks Assembly

Open

Assembly

Open

Final rocker/claw assembly

Open

Base for mechanism

Open

Final assembly mounted on base

Final Design

Open

Final Design with Integrated Circuits + Motor

Open

Claw Mechanism

Open

Connecting Rod Combing Rocker and Claw

Our final product consisted of the 4-bar crank system, the claw mechanism, the base, and the integrated circuits that powered the motor to actuate our robot arm.

In terms of circuits, we used an Arduino, a breadboard, a 9V battery, and a 13-kg servo motor.

Arduino Code

The code we used reads the joystick’s input and checks how it’s being moved. When the joystick is adjusted, the servo motor responds by changing its position, which controls our arm to open and close. This allows the 4-bar crank mechanism to pick up and release objects smoothly.

Open

Updated BOM: