2. Design Process

2. Design Process

I began designing my linkage system in the Planar Mechanism Kinematic Simulator and quickly iterated through many ideas in order to find a configuration that could fit in a relatively small space and that would work for a full rotation of the input link. I did this to prepare for motorization so that I could use a regular motor as opposed to a servomotor and so that I would not have to worry about potentially breaking the mechanism with the motor by going outside the designed for input link angle range.

PMKS_Web - Google Chrome 2021-05-08 13-22-29.mp4
25 May 2024, 09:17 AM

Once the link lengths and positions were decided, I switched over to Solidworks to design the actual parts. A screenshot of the final assembly is shown below. Using mate relations, I was able to confirm one final time that it would travel through a full input link rotation without any internal interferences. I designed the input link with a different hole shape so that it could easily slide onto a motor that I already had.

SOLIDWORKS Student Edition - Academic Use Only - [Proj2 _] 2021-05-08 13-38-56.mp4
25 May 2024, 09:17 AM