RED - KOMODO Quick Start Guide Recommended Workflow

Before shooting you will need to Calibrate the camera. This will help with noise in the final image. 

This step is very important, do this every time you start shooting and if you change locations with a temperature change of +/-30°F.

We will show you how to change this setting at the end of this Wiki.

First set camera to factory reset. To do so press MENU.

MENU is #2 in the picture.

Use the arrows to go highlight the maintenance page.

Arrows are #3 & #4 in the picture.

Click SEL to enter page.

SEL is #5 in the picture.

Then highlight Factory Reset and press SEL.

A message will pop up that it will delete all user settings and etc. Use the arrows to highlight Yes and click SEL.

Camera will restart and bring you to the Home Menu after initializing.

NOTE: Please allow sometime for this to happen.

Here are the recommended record settings. DON'T WORRY! We will show you how to change all of these settings.

Format: 6K 17:9

File Format: ProRes 

ProRes Resolution: 4K

ProRes Codec: ProRes 422 HQ

ProRes Color Profile: RWG/Log3G10

First we will change the File Format from the default.

First you will click MENU, then using the arrows highlight Project Settings. Then press SEL.