Ross Carbonite Switcher - Check Crosspoint BusMap
Start by selecting the MENU button.
Then selecting Config on the touch strip.
The touch strip screen will change.
Next, press on the center know to select BusMap
This will take you to the BusMap selection.
Turning the left most knob will select which Bus you are checking/assigning.
The Center knob will change the primary Input for that Bus.
The right most knob will select the Shift Input for that Bus.
The assignments should be as follows.
Bus # = Input = Shift
Xpt 1 = BK = BARS
Xpt 2 = CAM 1 = PROMPT
Xpt 3 = CAM 2 = ClipPlyr
Xpt 4 = CAM 3 = BG
Xpt 5 = CAM 4 = (none)
Xpt 6 = TOWER = M1
Xpt 7 = CG = M2
Xpt 8 = DVR A = M3
Xpt 9 = DVR B = M4
Xpt 10 = REMOTE = (none)
Xpt 11 = MinME1 = MinME1
Xpt 12 = MinME2 = MinME2
Xpt 13 = M3 = MinME3
Xpt 14 = M4 = MinME4
Xpt 15 = Shift = (none)