System Bravo Idle
Source IDLE Conditions!
This is a first pass effort by AMC. Sb Sublimator detail added by SDS 5/20/2015.Temperatures:
Al: Before melting 1.7% manual power, After melting 800C (with backup UPS in-line)
AsCrk: 850C
AsSub: 390C
SbCrk: 900C
SbSub: 533C (non-growth) / 65%
InTip: 350C
InBase: currently OFF
GaTip: 350C
GaBase: currently OFF
Er: 400C
Si: 350C
Be: 350C
GaTe: 100C
Substrate: 200C or 4.5%
HTS: 10C or 0%
LCLamp: 10C or 0%
CAR:
Beam Flux gauge on
In Transfer Position
Sb Sublimator:
When not growing with Sb, set the Sb Eurotherm in Auto mode at 533C. This is approximately 65% power. This setting may change depending on the needs of the various growers.
During growth, put the Sb Sub Eurotherm in Manual mode.
Standard Manual mode setting is 65%. This may change depending on requirements of the various growers.