Tiger Vac
Page under Construction
The Tiger Vac is an explosion proof vacuum intended for use with Phosphorus systems. It also captures As and Sb. It has an oil sump that traps or coats the incoming chunks/particles in oil.
Vacuum
Model number Exp1-10 4W
Serial number 00020169
120V, 50/60Hz, 1000W
Tank diameter 16", height 33.5" (not including wheels or fittings)
Has a carbon filter in it, part no. 212200L, 1 hr lifetime.
Has a ULPA filter, 5N on 0.12 micron at 100 cfm. No replacement or lifetime instructions.
Vacuum History
Last used in 2009?
Last turned on in Apr 2018 by NTS
Last bag change ?
Last carbon filter change ?
Last maintenance of other type ?
Maintenance and accessories mus conform with anti-static protocol
Oil Sump
No model number
Tank diameter 16", height 32" (not including wheels or fittings)
Fitting suction side (10 foot hose to chamber): ID 1.5" OD 2.25"
Fitting outlet side (5 foot hose to vacuum 150C fitting): ID 1.6" OD 2.25"
Oil Sump History
Last used 2009?
Oil status: currently full and dark brackish looking
Last oil change 2009?
Oil must be disposed of properly.
Maintenance and accessories mus conform with anti-static protocol
Hoses
Suction hose
Suction hose is from chamber to oil sump inlet.
10 feet long, wrapped in plastic, heavy.
Currently looks OK.
Currently has a crevice attachment, and plastic tubing attached to that attachment.
Pass through hose
Pass through hose is from oil sump outlet to vacuum inlet
5 feet long, black
Both ends are currently ripped, this hose must be replaced.
One end fitting is DC-2, the other is 1.5
Tiger Vac contact info
toll free 1-800-668-4437
Wayne Bryant in sales who can help us, ext. 239