/
DMC 3.206 Amplifier - Amp Power Outage - How to Turn on Power Sequencers

DMC 3.206 Amplifier - Amp Power Outage - How to Turn on Power Sequencers

Mar 03, 2022

No audio on Teaching Station microphones or speakers are off???

 

You have AMPs off most likely

 

Go to the room where tech staff stores the

Lectern in the back hallway to the left of the DMC 3.206 Screen in the Amp closet

 

Locate Circuit B - labeled on the RACK RAILS on front side of RACK

Locate Circuit D - labeled on the RACK RAILS on front side of RACK

 

 

 

 

GO BEHIND THE RACK AFTER LOCATING B AND D POWER CIRCUTS

 

WE WILL access THE CONTROLS FOR THESE CIRCUITS on the back

 

Make sure the switch is set to LOCAL

 

Then press the "Local Sequence Initiate"

PRESS for a second or so really press the button!

 

The power should restore on the Amps that are off.  May take about 5-10 seconds

NOTE Amps that are on will stay on