DMC 5.208 Zoom QuickSetup
Choose Macintosh HD |  |
Mac side workflow: Login with EID and Pw to the Teaching Station | |
Open Zoom | |
Choose Sign In | |
Click on SSO | |
Type in utexas
.zoom.us should already be in there
Click Continute | |
Log in again with EID and PW
Choose Sign IN | |
Two Factor Duo authentication terms | |
Choose Allow for zoom here | |
Choose OK for Microphone | |
Go to | |
Click OK here for Zoom to use the cameras | |
Then choose Video
Here are the choices for Camera
Choose AV.io SDI Video to use the “Pan, Tilt and Zoom” cameras in the room (Best Quality)
These are controlled using the controllers on the desk in the back corner of the room
| |
>Or choose the Webcams
Want the CU camera
>Choose Logitech Webcam C925e | |
want the wide shot of the room
>Choose HD Pro Webcam C920 | |
Then click on the Audio Preference
Speaker set to “Crestron”
Microphone set to “USB Audio Device”
USB audio selects the ceiling mics in the room | |
AND
The 4 microphones that are in these two drawers. | |
At the production desk in the back corner of the room make sure on the mixer press Layer A | |
and Mix 3 for Zoom | |
If you would like to use the Microphones Make sure Yellow, Red, Blue or Green is turned up depending on what mic / mics Also make sure that the Master audio is also turned up | |