Source IDLE Conditions!

Temperatures:

• Al: Before melting 1.7% manual power, After melting 800C (with backup UPS in-line)

• AsCrk: 850C

• AsSub: 320C

• InTip: 350C

• InBase: currently OFF

• GaTip: 350C

• GaBase: currently OFF

• La: 1000 C

• Gd: 600 C

• Lu: 700 C

• BiTip: 310 C

• BiBase: 300 C

• Si: 350C

• Be: 350C

• Substrate: 200C or 4.5%

• HTS: 10C or 0%

• LCLamp: 10C or 0%

• Heated Viewport 400C

CAR:

• Beam Flux gauge on

• In Transfer Position

As Sublimator:

• When not growing with As, set the As Eurotherm in Auto mode at 357C. This is approximately 29.5% power. This setting may change depending on the needs of the various growers.

• During growth, put the As Sub Eurotherm in Manual mode.

  • Standard Manual mode setting is 29.5%. This may change depending on requirements of the various growers.

PID values for Eurotherms (Pt, Ti, Td):

• LC Lamp: 106, 38, 6