Project Overview

You must create a mounting mechanism for the upper two seatbelt belts that interfaces to the frame.

Deadline - Nov 1st EOD

Constraints

Canopy placement. You may not be able to move around the mounting tabs much depending on how big or small this part is.

• Look at 000 to see this

Regulation 10.3.E on ASC 2026 - 30 deg below shoulder horizontal is very important.

You may choose to do FEA, it’s not very necessary on these tabs, though.

We would very much like to avoid adding a tube, but if absolutely necessary we can do something.

Design Considerations

Regulation 10.3.E on ASC 2026 has TONS of figures to help visualize the upper two belts' placement.

Daybreak 000 CAD to see tabs

I recommend going to pickle one workday to check out how exactly this mounting occurs irl