Project Overview

The common ballast is the ballast box at the front of the frame.

You must create a mounting mechanism for the common ballast that interfaces to the frame.

Deadline - Nov 1st EOD

Constraints

Aeroshell placement. You may not be able to move around the ballast other than the place it is in CAD

• Look at 000 to see this

Regulation 9.9 on ASC 2026

You’ll have to do FEA to make sure the ballast tabs don’t fail.

Design Considerations

Regulation 9.9 on ASC 2026

Daybreak 000 CAD

Daybreak Ergonomics Assembly

I recommend going to pickle one workday to check out how exactly this mounting occurs irl