Yamaha DM7 - Quick Start

When you power on the Equipment Power switches in CMB 4.130, the DM7 will boot up, but will be locked down with a password. If you are unsure of the password, please contact the tech team for assistance.

The console will unlock and you will see the last state that the console was left in.

There are over 100 inputs and upwards of 30 different outputs. In order to simplify workflows, there are console “scenes” for optimal usage.

To choose a scene, press the box on the touchscreen on the top left corner.

You will be presented with a “Scene List” with pre-configured scenes. Choose your intended use and press “Recall.” If done correctly, you should notice the fader banks change and the faders might move around.

To exit this menu, click the same box on the touchscreen.

To control the program output volume, adjust the farthest right fader labeled “ST A”

To control the volume of the speakers in the control room, use the knob labeled “A” under the “MONITOR” section.