MFPS - Rodecaster Audio Routing and Configuration

Before using, please familiarize yourself with how the Rodecaster works. It is capable of many advanced routing scenarios, so the user must know how to operate the menus.

User Guide: https://rode.com/en-us/user-guides/rodecaster-pro-ii

The following details the physical inputs and outputs on the Rodecaster. These can be routed ANYWHERE and can be assigned to any fader and do not reflect the layout of the channels on the faders.

XLR Input 1-4: XLR Input “Talent Mic” 1-4 on audio snake

Wireless Rode RF Mics also available as inputs

How to connect: https://rode.com/en-us/user-guides/rodecaster-pro-ii/setting-up-the-mixer-and-assigning-channels

Main L/R Out: Switcher Program Feed

Headphone out 1: Talent 1 Headphones

Headphone out 2: Talent 2 Headphones

Headphone out 3: A1 Headphones

Headphone out 4: ClearComm Program feed

RECOMMENDED CONFIGURATION:

Fader 1: Wireless Rode RF Mic

Fader 2: Talent Mic 2

Fader 3: Talent Mic 3

Fader 4 Talent Mic 4 - director mic for IFB Talkback

Bluetooth Fader

Soundpad Fader

WHEN USING THIS CONFIGURATION:

Director Mic (Channel 4) is being used for IFB for the director to talk to the talent. Therefore, the output routing from Channel 4 to headphone outs 3, 4 and Main L/R MUST BE MUTED.

To check, go to Configuration

Choose “Outputs”

Choose “Routing”

Select Headphone 3, Headphone 4, and Monitor

Ensure Channel 4 is turned OFF

Click on the button below the channel to toggle to off