RODECaster Pro - How to Record Audio from a Cell Phone via Bluetooth Connection
Follow First Steps to setup up the RODECaster | |
Follow RODE Broadcaster Mic to make sure the mic is ready to use | |
Turn up the sliders on the board and talk into the mic(s) you want to use | |
Have each guest and interviewer speak directly into the front of the mic, and not from the sides | |
Set the levels by watching the meters as you speak. You'll be at a good level to record when the color of the level bars peak at green going into yellow (see picture →)
You should never hit red! |
|
You can adjust headphone volume with these knobs | |
Make sure the Ceiling Speaker Volume is all the way down before recording!! | |
How to use the Cell Phone Input to hear a phone conversation
You will need to connect the cell phone. This is the phone that will be either making or receiving the phone call.
On the Rodecaster press the Bluetooth button shown here | |
On the display screen you will get a dialog message asking you to pair the phone
Choose Yes
| |
This will put the console into Bluetooth Discoverable mode, and the blue Bluetooth button will begin to blink. | |
On a Google Android Phone:Press the >Settings icon >Choose Connected devices Bluetooth
| |
Choose Pair new device | |
Choose RODECaster Pro | |
Choose Pair | |
On an Apple iPhone:Press the Settings icon
| |
Choose Bluetooth
| |
Enable Bluetooth, if not already enabled. | |
Under Other Devices, you should see RODECaster Pro. Press the name to connect. | |
Once connected, the RODECaster Pro will be listed as Connected under My Devices and is ready to be used. | |
When you are connected, the Iphone will have the RODECaster Icon and not the usual speaker icon | |
The Bluetooth light on the RODECaster will also stop blinking, and will become bright blue when the phone is connected. | |
Turn up the slider for the Bluetooth input so we'll hear audio from the phone
Now either call your guest or have them call you on your connected phone | |
The interviewee that you are calling will be heard in the headphones now and you will see levels on the board on BlueTooth Input
Double check the input levels from the BlueTooth input and adjust, if necessary
|
|
How To Use the IMac as a host for a Zoom Recording during a PodcastOn the Mac you can open Zoom, or whatever Our example is Zoom | |
Go to >Zoom > Preferences | |
Click on Audio and choose RODECaster Pro
Microphone RODECaster Pro Stereo | |
Turn up the USB channel on the RODECaster to get the audio input levels | |
Click on the Green REC button to start recording to the SD card | |
When recording the button will be RED
Conduct the narration, interview or podcast and when finished press REC button to stop recording | |
To hear what you did press the Settings Icon | |
Click on Podcasts | |
You can click on the top left and right arrows to navigate through the podcasts and click on the green play button to play the selection | |
Turn up the speaker volume to hear playback in the room
Turn up the headphone volume for playback in headphones | |
Once you have completed recording you can use the Podcast Transfer Mode to transfer the audio files to the computer.
Note that when the RØDECaster is in ‘Podcast Transfer Mode’ all other functionality is disabled. | |
To get to the Podcast Transfer Mode click on the gear icon in the top left corner of the LCD screen on the RØDECaster Pro. |
|
Click on Advanced icon | |
Click on microSD Card icon | |
Flip the Podcast Transfer Mode switch to ON | |
Confirm switching to Podcast Transfer Mode by clicking YES
Note: When the RØDECaster is in ‘Podcast Transfer Mode’ all other functionality is disabled. | |
The RØDECaster will mount as a volume on the desktop Double click on the mounted volume to open it and copy the files off to your hard drive and or upload to UT Box or Google Drive. | |
When you are finished transferring your files to the computer, click "Done," and then click "Yes." The RØDECaster will disconnect from the computer. |