Frame Change Log

This change log is to be utilized when changing the main frame reference sketch and weldment part file

Change Date	Brief description of what was changed	Who made the change? (who to contact if there are problems)	Visual of Change

Change Date	Brief description of what was changed	Who made the change? (who to contact if there are problems)	Visual of Change
Ex: 10/26/24	Ex: Frame reference sketch started, front crash structure and suspension hardpoints started	Ex: Josh	Insert image here
11/26/24	Roll hoop made larger to fit driver bounding box Removed back RH bracing Added additional rear RH bracing Some bottom tubes combined to straighten load paths Upper tubes combined to straighten load paths Front and rear HDPT updates	Josh
1/2/25	Roll hoop made smaller for aeroshell to accomidate changes to driver bounding box (canopy being too large) Raised rear to accomidate changes to rear shock mounting point Shortened front to accomidate changes to pedal box bounding box Removed some floor cross tubing Front and rear HDPT updated	Josh
2/1/25	Front frame shortened for upperslung pedal box mounting HDPT changes Removed floor cross bracings
	Front RH angled changed Cross bracing on flooradded Rear HDPT changes (lower rear)
	Removed redundant tubing in the rear