/
MFPS - BLACKMAGIC DESIGN VIDEO HUB & SMART- HUB CONTROL - output/input (Reference)

MFPS - BLACKMAGIC DESIGN VIDEO HUB & SMART- HUB CONTROL - output/input (Reference)

VIDEO HUB CONTROL - OUTPUTS/INPUTS DESTINATIONS/SOURCES

 

 

  1. Find the application on Finder named “VideoHub Control“

 

  1. Click “Allow”

  1. Click on “Select a VideoHub”

  1. On “Videohub Panels” select “40x40 ROUTER”

 

  1. When video panel shows you this view click on the lower right corner to change view. It is important to choose the right view to make sure the sources are correctly link to the right destinations.

 

If for any reason the router has been changed and the outputs are out of order, check the guide below making sure the sources are in the right destinations.

GUIDE/ REFERENCE

 

The correct outputs should look as the following:

 

 

 

 

 

 

Renaming Sources Outputs and Destination Outputs

Note - Renaming sources in “Videohub Setup” does not directly affect the outputs or inputs. If you need to make changes you should use the “BlackMagic VideoHub Control.”

 

  1. Select Videohub Setup

 

  1. Select the Icon in the middle

 

 

The first inputs should be camera 1, camera 2, and camera 3