Enclosure Panel Connector Master Doc Review

Battery
- 12 pin MX150 connector (Key A)
- TE Amp+ HVA 1200 (Code A)
  - 2 of these, Code A = Key A ?
- TE Amp+ HVA 1200 (Code B)
- TE Amp+ HVA 1200 (Code C)
- ESTOP
- Hirose 2 pin
  - on assembly, not on WH master doc
Dashboard
- 20 pin MX150 connector (Key A)
- 12 pin MX150 connector (Key A)
- 6 pin MX150 connector
- USB-C Hub
  - on assembly, not on WH master doc
- Micro SD Panel Mount
  - on assembly, not on WH master doc
Steering Angle Sensor
- MX150 6 pin connector
  - steering sensor connects to 6 pin and then to 12 pin on dash?
Pedals
- MX150 6 pin connector (Key A)
- MX150 12 pin connector (Key A)
- MX150 8 pin connector
- 6 pin Wago
- pigtailed
PDE
- MX150 12 pin connector
- MX150 20 pin (Key A)
- Amphenol ePower Lite (Key A)
  - 2 of these, Code A = Key A ?
- Amphenol ePower Lite (Key Y)
- HVH-280 2 pin (Key A) x2
- XT60 2 pin panel mount
- XT30 2 pin panel mount
  - (needs to be CADed)
LV Fusebox (FDUBB)
- MX150 20 pin (Key A)
- XT30 2 pin board mount (J1-14)
Right Indicator Lighting Enclosure (pigtailed)
- MX150 8 pin
- MX150 4 pin
- MX150 3 pin
Headlights Lighting Enclosure (pigtailed)
- MX150 8 pin
- MX150 4 pin
- MX150 3 pin
Left Indicator Lighting Enclosure (pigtailed)
- MX150 8 pin
- MX150 4 pin
- MX150 3 pin
Canopy Lighting Enclosure (pigtailed)
- MX150 8 pin
- MX150 4 pin
- MX150 3 pin
Rear Lighting Enclosure (pigtailed)
- MX150 8 pin
- MX150 4 pin
- MX150 3 pin
MPPT
- MX150 6 pin
- Hirose 7 pin male
- HVH-280 2 pin (Key A)
- Sealed Hole (no connector)
  - ?
- USB-C Panel Mount
  - on assembly, not on WH doc
Motor Controller
- MX150 6 pin (Key A)
- MX150 12 pin (Key A)
- Amphenol ePower Lite 2 pin (Key Y)
- Amphenol ePower Lite 3 pin (Key A)
  - 2 of these, Code A = Key A ?
- USB-C Panel Mount
  - on assembly, not on WH doc
Telemetry Leader
- MX150 20 pin (Key A)
- Antenna Panel mounts
  - made cutouts, need to add to assembly
- RJ45 Ethernet cable
- SD card panel mount
- USB-C debug
Telemetry Air Board Front (pigtailed)
- MX150 12 pin (Key A)
Telemetry Suspension (pigtailed)
- MX150 12 pin (Key A)
Ride Height (pigtailed)
- MX150 12 pin (Key A)
Telemetry Wheels Board (pigtailed)
- MX150 4 pin (Key A)
Pump
- MX150 6 pin (Key A)
- MX150 20 pin (Key A)
Blackbody A
- MX150 16 pin (Key A)
Blackbody B
- MX150 16 pin (Key A)
Blackbody C
- MX150 16 pin (Key A)
Array Irradiance Sensor
- 6 pin nanofit
Array Temp Sensor
- 2 pin nanofit
Power Selector
- XT30 2 pin x2
- XT60 2 pin x2
- MX150 6 pin
Canopy USB Hub
- 2 pin (unknown?) ?
- has USB-A not USB-C
Quick Disconnects
- ..