Ross Crossover Switcher - How to Reset the Switcher
Do not do this unless you have locked up the switcher.
Do these steps:
Ross reset
Menu>Reset>Next>Factory Reset>Push the button>Confirm>
If that does not work do this next
Go into the production control room behind the CMB Proctor desk
Find the Ross Crossover Switcher
Press in towards the middle of the rack the two black tabs to open the fron |  |
Turn off the power button here.
Wait about 3 minutes and turn on
Then it'll take about 5 or more minutes to boot up | |
Then you will have to do the Studio 4A – Ross Switcher – Audio N – Pass Setup | |
You then need to set the switcher to External Sync | |
Need to check the Crosspoint Routing and Shift Crosspoint Routing | Ross Crossover Switcher - How to Check and Set the Crosspoints and Set Correctly |
Then you must set the Alpha channel for the CG up again. | Ross - Crossover Switcher - How to fix the Character Generator or Ross XPressions Alpha Chanel |
You must also set the Chroma Key channel again. | |
Set the Frame Sync for the Remote Camera | Ross Crossover Switcher - How to Fix a Sync Line in Remote Camera Input or Frame Sync the Input |
How to set the key and dissolve transitions | Ross - Crossover Switcher - How to set the Key Transition Durations Cuts |