This workflow is how to relink footage that has had the playback frame rate changed on it and then transcoded.

Example - Footage is used that has been shot at 60 FPS and used in a timeline at 23.98 the AVID Master clips will not link back to the camera originals.

If the footage was converted to a different frame rate the only way to online or if it was transcoded to a lower resolution is to re-transcode and re-link

Open the AVID project and identify the 59.94 or different frame rate camera originals that were linked in the AVID project and transcoded to the low quality offline files

Note did you change the source settings?? >Right Click the Clip in the bin and choose >Source Settings
Did you change the clip playback frame rate to either 59.94 or 23.98
If you do not remember Consolidate/Transcode to the higher resolution codec at both Playback framerates 23.98 and 59.94
Choose the hard drive to transcode to and what resolution for online
Choose to Convert the frame rate here
Then after that clip is converted try to Re-link – if the clip will not relink to the timeline the go to the “Source Settings” and change the playback frame rate to 23.98 and then transcode again.
The two original clips are transcoded at both playback frame rates and the resulting files (one of them will relink in the timeline) The 23.98 fps playback framerate is the longer version FYI
Select all 4 of the new master clips
Choose Relink >Managed Media
Choose relinking settings shown here
But if that does not work try setting the sources to match Select the re-transcoded clips you are trying to Re-link to the timeline
Go to >Clip>Modify>Modify Clip
Choose Set Timecode pulldown and choose >Set Source
Select New
Create a tape name (123456789) or whatever Click OK
OK
OK
OK
Now we need to modify the source of the Master clips that were used in the timeline put the timeline indicator on one of the clips that are offline that we need to fix
Right click on the track and choose >Match Frame Track
Choose the Find bin to locate the master clip that you want to re-link
Select the clip in the bin
Go to >Clip>Modify>Modify Clip
Choose Set Timecode pulldown and choose >Set Source
Select the SAME tape name you created in this wiki earlier to modify the clips Click OK
OK
OK
OK
Next Select all the clips in the bin that we copied over into the new bin from the Media Tool These are the clips that exported from Davinci Resolve
Right click the sequence to relink and choose Relink
Choose Selected Items in All open bins Choose to relink by Tape Name or Source file Name
If that doesn't work choose Choose to relink by Tape Name or Source file ID
The sequence will re-link to the Media

Browser not supported